R911246345 (MDD115A-N-015-N2L-130GA0)
MDD Synchronous Motors
Technical Specifications
Power Connector Type
Can be crimped or soldered
Nominal Speed
1500min-1
Transportation and Storage Orientation
Horizontal
Cooling Method
Natural Convection
Weight
33kg
Thermal Constant
90 minutes
Power Connector Direction
A-side
Torque Constant
1.34Nm/A
Windings Resistance
0.54 Ohms at 20°C
Servo Feedback
Digital
Feedback Cable Diameter
8.8+/-0.3mm
Ship-ability
Can be shipped to any address worldwide
Lubrication
Bearings are lubricated for a lifetime
Operation Application
Suitable for nibbling machines
Cyclic Load Capacity
High
Absorbed Axial Forces
Absorbed by fixed bearing on B side.
Frequently Asked Questions
What is the practical effect of a continuous torque rating at standstill?
It allows the motor to hold loads steadily without overheating when stationary. This is critical in clamping, pressing, or holding applications where torque is needed without rotation.
How does digital servo feedback in the MDD115A-N-015-N2L-130GA0 improve control accuracy?
It enables precise monitoring of rotor position, ensuring tighter synchronization with the drive controller. This results in smoother motion and reduced error in applications requiring exact positioning.
How does nominal speed impact integration into drive systems?
A fixed nominal speed ensures compatibility with controllers tuned for that operating range. It helps balance torque delivery and efficiency across repetitive cycles.
Can this motor be used in packaging machinery requiring fast indexing?
Yes, the servo feedback and torque capacity enable rapid starts and stops with minimal overshoot. This is particularly useful for conveyor-driven or pick-and-place packaging operations.
Why does the MDD115A-N-015-N2L-130GA0 use a plain shaft instead of a keyed one?
A plain shaft allows flexible coupling methods without stress concentration at key slots. It reduces mechanical wear and can support backlash-free connections in precision systems.
Common Misspellings
MDD-115A-N-015-N2L-130GA0
MDD115A N 015 N2L 130GA0
MDD115A-N-015-N2L-130-GA0
MDD115A-N-015-N2L-130-GAO
MDD115A-N-015-N2L-130GAO
MDD115A-N-O15-N2L-13OGAO
MDD115AN015N2L130GA0
mdd115a-n-015-n2l-130ga0
Internal Product Review
The MDD115A-N-015-N2L-130GA0 by Bosch Rexroth Indramat provides 28.0 Nm continuous torque at standstill. It incorporates digital servo feedback (DSF), and features a 130 mm centering diameter with a sealed plain shaft and side-A connector. Its design supports precision motion in robotics, packaging, and textile automation roles.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD115A-N-015-N2L-130GA0.
Want to 
