R911251296 (MDD065A-N-040-N2M-095GB1)

The holding brake with 3.0 Nm torque prevents unwanted motion or backdriving when power is removed, improving safety. It also means mechanical load must be sized so brake can stop inertia without overheating.

With 0.8 Nm at zero speed, the motor can maintain position under load without rotating, which helps in vertical or static load situations. It reduces need for external rigid locking mechanisms in many installations.

The encoder retains full position information over multiple revolutions even after power loss, so systems don’t need homing cycles.

Proper matching of mounting interface to the 95 mm centering diameter is needed to minimize mechanical stress and run-out errors. Misalignment here can degrade encoder accuracy and increase bearing wear.

With the brake engaged, the motor can fully stop motion even under higher loads, whereas without the brake, the motor torque (0.8 Nm) is the only static resistance.