R911253832 (MDD090C-N-030-N2M-110GB0)

What dynamic behavior can I expect at nominal 3000 min⁻¹ speed?

At full speed, the motor exhibits lower generated torque (due to back-EMF) and the current demand rises; the controller must maintain proper flux weakening or current limits to sustain performance.

What real-world constraints does having “no blocking brake” impose?

Without a holding brake, the shaft cannot be locked mechanically at standstill—thus, driven loads must not self-rotate under gravity or external torque when powered off.

Which drive controllers are recommended or compatible with this motor (naming manufacturer and product code)?

The Bosch Rexroth DDC / MDD series drives (e.g. DDC + MDD digital servo drives) are designed to interface with the MDD090C-N-030-N2M-110GB0, leveraging its DSF feedback.

What lifetime or reliability factors are most critical in B2B deployments of this motor?

Bearing load, thermal cycling, and alignment stresses drive reduced life, so systems should minimize radial loads and maintain ambient temperature within spec to ensure long mean time between failures.

How does the integrated multiturn absolute encoder impact system startup and homing?

The encoder retains absolute position across power cycles, so the controller can resume motion without a full rehoming routine (if configured properly).

MDD-090C-N-030-N2M-110GB0

MDD090C N 030 N2M 110GB0

MDD090C-N-030-N2M-110-GB0

MDD090C-N-030-N2M-110-GBO

MDD090C-N-030-N2M-110GBO

MDD090CN030N2M110GB0

MDD90C-N-030-N2M-110GB0

MDDO90C-N-030-N2M-110GB0

MDDO9OC-N-O3O-N2M-11OGBO

mdd090c-n-030-n2m-110gb0

The MDD090C-N-030-N2M-110GB0 motor from Bosch Rexroth offers 10.4 Nm continuous torque at standstill and runs at a nominal speed of 3000 min⁻¹. It includes a multiturn absolute encoder and a plain shaft with a shaft seal for reliable performance. This digital drive motor suits automation in packaging, printing, and CNC machining industries.