R911254234 (MDD093B-N-030-N2L-130GA0)

What motor feedback system is used on MDD093B-N-030-N2L-130GA0, and why is it beneficial?

It uses Digital Servo Feedback (DSF) for providing precise position/speed measurement and storing motor parameters for quick, safe commissioning. It enables accurate control and repeatable motion when paired with Indramat digital drives.

How does the plain shaft with shaft seal help in MDD093B-N-030-N2L-130GA0?

The plain shaft eases coupling to clamping hubs or sleeves for reducing backlash paths. Its integrated shaft seal limits ingress at the shaft interface to maintain consistent behavior in industrial environments.

Why is “continuous torque at standstill 14.5 Nm” important on MDD093B-N-030-N2L-130GA0?

It indicates the motor can deliver 14.5 Nm without overheating while holding or creeping is useful for indexing, clamping or low-speed contouring. Its steady torque supports accurate positioning in packaging and CNC setups.

What does the 130 mm centering diameter change during installation of MDD093B-N-030-N2L-130GA0?

The 130 mm pilot centers the motor precisely to the machine interface for shortening alignment time and improving coaxiality with the driven element. Its better centering can reduce runout and improve servo tuning.

How does “standard balancing” affect the MDD093B-N-030-N2L-130GA0 in high-speed motion?

The standard balancing reduces vibration at operating speed to improve surface finish and sensor readings in machine tools or converting lines. It lower vibration also helps bearings and couplings last longer.

MDD-093B-N-030-N2L-130GA0

MDD093B N 030 N2L 130GA0

MDD093B-N-030-N2L-130-GA0

MDD093B-N-030-N2L-130-GAO

MDD093B-N-030-N2L-130GAO

MDD093BN030N2L130GA0

MDD93B-N-030-N2L-130GA0

MDDO93B-N-030-N2L-130GA0

MDDO93B-N-O3O-N2L-13OGAO

mdd093b-n-030-n2l-130ga0

The Indramat’s Synchronous Motor MDD093B-N-030-N2L-130GA0 couples DSF feedback with a plain-shaft that has an embedded sealed interface and its connector is positioned ob side-A. It provides 14.5 Nm at standstill and 3000 min⁻¹ of operating speed. This unit comes in size 093/B-length that suits packaging cells, CNC axes and pick-and-place equipment, where as its 130 mm centering diameter and standard balance simplify alignment.