MDD Synchronous Motors | Indramat Motors
R911257319 (MDD093C-N-020-N2L-110GB0)
Request a quote
Description
Rated 4.4 with 11 reviews
The Bosch Rexroth R911257319 (MDD093C-N-020-N2L-110GB0) is a digital AC servomotor with a centering diameter of 110mm, superb compatibility with nibbling machines, and an impressive power to weight ratio. It features feedback with data storage, storing necessary parameters. With protection against water and external object penetration, it can operate stationarily under weatherproof conditions in accordance with IEC 721-3-3. Attention should be given to not exceed axial and radial forces during operation. It has an IP 65 protection rating, runs on 115VAC/230VAC with a blower, and employs surface cooling for high-frequency stop-start operations. Torque constant stands at 0.91Nm/A at 20°C, and the motor uses an optical system encoder with relative position detection. The product should be stored or transported within -20°C to 80°C to maintain operability and is covered by a one-year warranty. Care should be taken with high radial loads to prolong the bearing lifespan.Pricing & Availability
- Factory New Pricing is available!
Specs
Centering Diameter: 110mm
Feature: Feedback with data storage
Compatibility: Compatible with nibbling machines
Characteristic: High power to weight ratio
Power Connector Orientation: B Side
Protection Rating: IP 65 for the shaft
Supply Voltage: Operates with 115VAC/230VAC with a blower
Prime Coat Thickness: Increase up to 40µm
Balance Class: N Balance for normal applications
Torque Constant: 0.91Nm/A at 20°C
Storage and Transportation Temperature: -20°C to 80°C
Bearing Lifespan: Reduced with application of high radial loads
Axial Forces: Applies horizontally on shaft
Operating Mode for Torque Curves: S6
Power Cable Requirement: Soldered power cables only with inch diameters
DC Bus Voltage: Available with or without a regulated power supply
Shipping: Supports global shipping
Feature: Feedback with data storage
Compatibility: Compatible with nibbling machines
Characteristic: High power to weight ratio
Power Connector Orientation: B Side
Protection Rating: IP 65 for the shaft
Supply Voltage: Operates with 115VAC/230VAC with a blower
Prime Coat Thickness: Increase up to 40µm
Balance Class: N Balance for normal applications
Torque Constant: 0.91Nm/A at 20°C
Storage and Transportation Temperature: -20°C to 80°C
Bearing Lifespan: Reduced with application of high radial loads
Axial Forces: Applies horizontally on shaft
Operating Mode for Torque Curves: S6
Power Cable Requirement: Soldered power cables only with inch diameters
DC Bus Voltage: Available with or without a regulated power supply
Shipping: Supports global shipping
Shipping
In Stock, Ships Today | Warranty | Shipping | Repairs | Exchange |
|---|---|---|---|
| 1 Year Indramat USA Warranty included | Worldwide shipping via UPS and Fedex | We offer repair service for the R911257319 in 10 days. | Exchange credit for your defective unit available. |
