Drive Controller Needed
Yes
Blocking Brake
Does not assure personnel safety
Size Code
93
Overall Length
357mm
Max Tightening Torque for Screws
5Nm
Theoretical Use Maximum Torque
45.1Nm (without considering its blocking brake)
Power and Feedback Connectors
Must be procured separately
Shipping
Through freight carriers with global presence
Shaft Sealing Ring
Present
Blower Support
1 x 115VAC or 230VAC from supply voltage
Reseating Requirement
After 2 years storage
Load During Transportation and Storage
Must not be under load
Output Direction of Power Connector
B side
Surface Temperature
High during and immediately after operation.
The MDD093B-N-040-N2L-130PB1 is a synchronous motor for digital drive controllers, providing 14.5 Nm continuous torque at standstill and 11 Nm holding brake torque. It supports digital servo feedback, keyway shaft, and a nominal speed of 4000 min⁻¹. It is produced by Bosch Rexroth Indramat and provides stable and efficient operation.