R911259643 (MDD115D-N-015-N2L-130PA0)
MDD Synchronous Motors
Technical Specifications
Lifting Screws
Complies with DIN 580
Blocking Brake
Absent
Common Use
Tool-changing Equipment and Nibbling Machinery
Power-to-Weight Ratio
High
Overload capabilities
Present
Cyclic Load Capacity
Present
Shock Duration
Lateral Axis: 6ms
Pilot Diameter
Standard
Housing Coat
Resistant to weathering and yellowing
Balance Class
N
Feedback Connector
Angled Type or Straight-Type
Orientation Change for Angle Feedback Connector
Permitted in increments of 90°
Shut Down Feature
Automatic due to thermal reasons
Power Cable Diameter
1 Inch Soldering Only
Pins on Flanged Socket
12 for feedback connector
Packaging
Durable
Frequently Asked Questions
What motion-control role does the MDD115D-N-015-N2L-130PA0 serve in automated machinery?
It’s a digital AC synchronous servomotor for Rexroth/Indramat drive controllers for delivering 57 Nm at standstill and 1500 min⁻¹ nominal speed for precise axis positioning and feed tasks. Its typical deployments include machine-tool axes, textile lines, packaging formers, robotics and transfer/handling equipment.
How does the digital servo feedback (DSF) used on MDD115D-N-015-N2L-130PA0 simplify commissioning and control accuracy?
The DSF provides integrated digital encoder communication that pairs with specified Indramat drives (e.g., DKS/DDC families) for streamlining parameterization and improving synchronous phase alignment. Its feedback cabling preserves signal integrity over long runs and adheres to approved motor/drive combinations.
Why is the 130 mm centering diameter significant for MDD115D-N-015-N2L-130PA0 mounting?
Its pilot (register) standardizes flange alignment for ensuring coaxial accuracy when coupling to gearboxes or direct-drive load fixtures. It reduces shaft-to-load runout and supports repeatable mechanical interchange across compatible machine frames.
What does “Side A connection direction” on MDD115D-N-015-N2L-130PA0 imply for cabinet and cable routing?
The “Side A” specifies the power/feedback connector orientation relative to the shaft view for aiding right-hand cable egress and tight cabinet layouts. It also defines alternate exit directions (Side B/left/right) for platform uniformity across installations.
What controller families are compatible with the MDD115D-N-015-N2L-130PA0’s DSF encoder topology?
The Rexroth/Indramat documentation links DSF-equipped MDD motors with DKS and DDC controller lines, while only listed motor/drive pairings should be used per configuration sheets. It is rcommended to maintain feedback cable limits and pinouts for reliable operation.
Common Misspellings
MDD115DN015N2L130PA0
MDD115D N 015 N2L 130PA0
mdd115d-n-015-n2l-130pa0
Internal Product Review
The Bosch Rexroth’s MDD115D-N-015-N2L-130PA0 motor combines DSF encoder feedback, a 130 mm pilot and Side-A connectors with a sealed keyway shaft for reliable operations. It delivers 57 Nm standstill torque at 1500 min⁻¹ speed. This unit is suitable for tooling, textiles, packaging, robotics and transfer lines. It comes without a holding-brake assembly.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD115D-N-015-N2L-130PA0.
Want to 
