R911260756 (MDD115D-N-015-N2L-130GA0)

What practical advantage does the 57.0 Nm continuous torque at standstill offer for MDD115D-N-015-N2L-130GA0 users?

It sustains holding and low-speed process torque without drift for enabling stable tensioning, pressing or indexing at near-zero speed. It supports precise dwell phases in tasks like forming, winding or tool positioning.

How does digital servo feedback (DSF) in the MDD115D-N-015-N2L-130GA0 improve axis accuracy under varying loads?

It continuously measures rotor position/velocity and feeds it to the controller for tight closed-loop correction for minimizing following error. It enhances contour fidelity and synchronization on multi-axis lines such as printing and packaging.

Why is the 130 mm centering diameter significant when mounting this motor to gearboxes or machine frames?

The 130 mm pilot registers concentricity for reducing misalignment-induced radial load on the plain shaft and bearings. It shortens setup time and improves repeatability when swapping servomotors on modular tooling.

How does the plain shaft with shaft seal on MDD115D-N-015-N2L-130GA0 aid reliability in particulate-rich environments?

The plain shaft simplifies rigid or clamped couplings, while its seal limits ingress of contaminants toward the bearing region. It results in steadier lubrication life and reduced runout growth in dusty or mist-laden cells.

What role does the side-A connector orientation play during cabinet layout and cable routing for MDD115D-N-015-N2L-130GA0?

The fixed side-A exit provides predictable bend radii and EMC planning for helping maintain shielding continuity. It also keeps feedback/power harnesses clear of rotating elements on compact end-effector mounts.

MDD115DN015N2L130GA0

MDD115D N 015 N2L 130GA0

mdd115d-n-015-n2l-130ga0

The Bosch Rexroth Indramat’s MDD115D-N-015-N2L-130GA0 synchronous servo motor pairs digital servo feedback with a 130 mm centering register for precise alignment. It delivers 57.0 Nm at standstill and possess 1500 min⁻¹ of nominal speed via a plain. This unit comes with a sealed shaft and side-A connector. It is well-suited for machine tools, printing, packaging, textiles and robotics.