Power Density: High
Suitable For: Cutting in high-speed ranges
Commutation Method: Electronic using permanent magnets
Bearings: Lubrication for a lifetime
Installation: Minimum Process with readymade cables
Blocking Brake: Available
Output Reduction: Between 45°C and 55°C
Protection: Complete from the penetration of external objects
Shaft: Output keyway with shaft sealing
Protection Rating: IP 44 with blower mount
Feedback: For rotor position detection
Housing Paint Layer: Additional, maximum thickness of 40μm
Mounting Specifications: According to DIN IEC 34-7
Orientation: Upright with shaft either upward or downward
Brake Control: By digital drive controller
Angle Feedback Connector: Located towards the B side
Cooling: Forced mechanism
Data Storage: In motor feedback
Position: Relative, retained in connected drive controller
Operating Curves: Depict speed-limiting and torque-limiting data
Maximum Speed: According to DC bus voltage from supply source
Operating Temperature: 0°C to 45°C
Connectors: Feedback and power, to be procured separately
Shipping: Via reputed freight carriers.