The R911273691 (MDD065D-N-060-N2L-095GA1) is a high performing servo motor by Bosch Rexroth that is economical and efficient. Positioned in the A-side of the motor housing, the power connection is accompanied by a plain shaft with a sealing ring. It is outfitted with a 0.55 kg holding brake boasting 3 Nm holding torque and a 0.38 x 10-4 kgm moment of inertia that runs on a nominal voltage of 0.6 Amp. With a maximum current of 46.2 amps and a torque output of 7.8 Nm, it can reach speeds of up to 6000 RPM. Along with a torque constant of 0.26 Nm/A and a winding resistance of 0.74 ohms, the motor features a winding inductivity of 0.9 mH. Highlighting its digital servo feedback, the MDD065D AC servo motor is equipped with an efficient cooling system situated in its heat-dissipating enclosure. It presents an IP65 protection certification and weighs 5.3 kilos. This motor can operate at up to 1000 meters above sea level and within a range of -20 to +80 degrees Celsius. The rotor consists of rare-earth magnetic materials and iron oxide, with a moment of inertia of 3.8 x 10-4 kgm.
Power Connection: Motor Housing As Side Shaft Type: Plain shaft with Sealing Ring Holding Brake Weight: 0.55 kg Holding Torque: 3Nm Moment of Inertia: 0.38 x 10-4 kgm2 Nominal Voltage: 0.6A Release Delay: 30ms Clamp Delay: 15ms Maximum Speed: 6000RPM Maximum Current Intake: 46.2A Maximum Torque Output: 7.8Nm Torque Constant: 0.26Nm/A Winding Resistance: 0.74ohms Winding Inductivity: 0.9mH Motor Feedback: Digital Servo Feedback Cooling: Natural and Surface Cooling Weight: 5.3Kg Protection Certificate: IP65 Coating Color: Black Coating Layer Depth: <40 micro meters Centering Diameter: 095mm Balancing Class: N Insulation Class: F Constant Torque: 2.7Nm Standstill Current Consumption: 10.3A Installation Height: 1000m Above Sea Level Operation Temperature: 0 to +45C Relocation Temperature: -20 to +80C Rotor Material: Iron Oxide/Rare-earth Magnetic Material Moment of Inertia: 3.8 x 10-4 kgm2.