MDD Synchronous Motors | Indramat Motors
R911274266 (MDD090A-N-030-N2M-110GA2)
Request a quote
Description
Rated 4.9 with 7 reviews
The Bosch R911274266 (MDD090A-N-030-N2M-110GA2) is a MDD series servo motor, known for its feedback support through an integrated encoder sensor that gauges parameters like speed and torque. This information is relayed to the servo drive controller via a dedicated feedback cable, while the motor power, supplied by the controller, is connected through a separate power cable. The motor operates through natural convection or surface cooling, with the former allowing continuous torque and current at standstill at 3.7 Nm and 6.3 Amps, and the latter 5 Nm and 8.5 Amps. The motor features a plain output shaft, a housing with a 110mm centering diameter, and runs at a nominal speed of 3000 RPM. The thermal time constant is 45 minutes for natural convection and 30 minutes for surface cooling. Included is a blocking brake, which releases the motor shaft on application of a 24V DC signal.Specs
feedback feature: Integrated encoder
power cable location: Side A of motor housing
convection continuous torque: 3.7 Nm
convection continuous current: 6.3 Amps
surface cooling continuous torque: 5 Nm
surface cooling continuous current: 8.5 Amps
thermal time constant (natural convection): 45 minutes
thermal time constant (surface cooling): 30 minutes
mass: 14 kilograms
nominal motor speed: 3000 RPM
centering diameter: 110 millimeter
output shaft: Plain
blocking brake: Included
holding torque: 11 Nm
nominal current: 0.5 Amps
release delay: 60 milliseconds
clamping delay: 20 milliseconds
brake mass: 0.5 kilograms
brake release signal: 24 Volts DC
power cable location: Side A of motor housing
convection continuous torque: 3.7 Nm
convection continuous current: 6.3 Amps
surface cooling continuous torque: 5 Nm
surface cooling continuous current: 8.5 Amps
thermal time constant (natural convection): 45 minutes
thermal time constant (surface cooling): 30 minutes
mass: 14 kilograms
nominal motor speed: 3000 RPM
centering diameter: 110 millimeter
output shaft: Plain
blocking brake: Included
holding torque: 11 Nm
nominal current: 0.5 Amps
release delay: 60 milliseconds
clamping delay: 20 milliseconds
brake mass: 0.5 kilograms
brake release signal: 24 Volts DC
Shipping
Call For Quote | Warranty | Shipping | Repairs | Exchange |
|---|---|---|---|
| 1 Year Indramat USA Warranty included | Worldwide shipping via UPS and Fedex | We offer repair service for the R911274266 in 10 days. | Exchange credit for your defective unit available. |
