R911283224 (MDD115D-N-015-N2M-180PA2)

How does the nominal speed of 1500 min⁻¹ on MDD115D-N-015-N2M-180PA2 influence gearbox selection?

The 1500 rpm base rotating speed allows standard 4-pole gearing and simplifies meeting feed-rate envelopes without overspeeding the rotor. It balances torque density and thermal headroom for continuous duty cycles.

What are the mounting and alignment implications of the 180 mm centering diameter on MDD115D-N-015-N2M-180PA2?

Its ensures concentricity to the machine interface for minimizing radial misalignment that raises bearing loads. It also standardizes adapter-plate design across 115-frame platforms.

Why does the keyway shaft and “standard shaft end” matter for couplings on MDD115D-N-015-N2M-180PA2?

Its output simplifies torque transmission with rigid or elastomeric couplings and prevents creep under reversing duty. Its single-ended configuration eases guarding and reduces overhung mass on non-drive side.

How does the shaft seal contribute to reliability in packaging or textile environments?

The seal limits ingress at the rotary interface for helping protect bearings and encoder cavity from dust, oil mist or fibers. It preserves feedback integrity and reduces maintenance intervals in particulate-rich processes.

What are the cabling/layout considerations of “Connection Direction: Side A” and connectorized terminations on MDD115D-N-015-N2M-180PA2?

Its connectors streamlines trunk routing and bend-radius management in tight enclosures. Its quick-disconnect connectors speeds replacement while maintaining shielding and strain-relief critical for DSF feedback fidelity.

MDD115DN015N2M180PA2

MDD115D N 015 N2M 180PA2

mdd115d-n-015-n2m-180pa2

Bosch produces MDD115D-N-015-N2M-180PA2 as a servo motor that suits vertical and static load due to its 60 Nm brake. It integrates digital servo feedback with a multiturn absolute encoder for precise positioning. This unit offers 57 Nm continuous standstill torque and 1500 min⁻¹ of nominal speed. Its keyway shaft and 180 mm pilot make it fit into machine tools, packaging, printing and textile automation.