Use: Areas with explosive potential
System Accuracy: ±80 angular seconds
Shaft design: Shaft with keyway and sealing ring
Position of power connection: Top
Compliance: European Standard (EN)
Cable Diameter: 13 – 16 mm
Motor Frame Size: 118
Noise level during operation: Less than 75 decibels
Moment of Inertia: 0.01940 kgm2
Holding Brake: None
Weight: 44 kg
Maximum Speed: 4000 revolutions per minute
Thermal Time Constant: 1.5 hours
Winding Inductance: 0.58 Ohm
Discharge Capacity: 10.3 nF
Max Current: 69.1 Amps
Max Torque: 102.0 Nm
Continuous Torque at Standstill: 28.0 Nm
Continuous Current at Standstill: 15.3 Nm
Torque Constant: 1.50 Nm/A
Winding Resistance: 7.60 mH
Constant Voltage: 130.0 V/min-1 at 20o C (68o F)
Operating Temperature: 0 to 40 degrees Celsius
Protection: IP 65 degree
Insulation Class: F as per DIN EN 60034-1