MS2N06-D0BNN-BSUH0-NNNNN-NN

Bosch Rexroth Indramat manufactures the MS2N06-D0BNN-BSUH0-NNNNN-NN synchronous servo motor as part of the MS2N Synchronous Servo Motors series. The model operates as a torque-controlled actuator for positioning, contouring, and speed-regulated axes in automated cells and machinery.

The motor reaches a rated speed of 3000 1/min, allowing moderate base frequency operation while leaving electrical headroom for field-weakening modes. A rotor with Low inertia reduces acceleration time, making the unit suitable for pick-and-place cycles or electronic camming. Internal Self-cooling draws heat through the stator surface so no external blower or liquid jacket is required. Position feedback is provided by a Singleturn - 1 revolution absolute encoder; the 128-period Hiperface® interface supplies commutation data and multiturn tracking through the drive. The size designation MS2N06, together with frame length D, places the motor in the medium-power range of the platform, while the encoder performance, flange exactness, and other design features are identified as standard to streamline interchangeability across similar axes.

A Standard bearing supports the smooth shaft and manages radial loads typical of belt or coupling drives. Power and feedback leads exit through a Double cable connection M23 / M17, rotatable, allowing orientation after mounting. The shaft end is Smooth, without shaft sealing ring, so an external seal or protective bellows must be added if fluid ingress is expected. The mounting interface follows B5 / IM3001, PT1000, giving a centering pilot on the flange and an embedded temperature sensor for drive-based derating. Surface protection is a Standard varnish, RAL 9005 black finish that resists shop contamination. The unit omits a holding brake, relies on external mechanics for power-off holding, and keeps overall inertia low. Flange accuracy and general mechanical characteristics are cataloged as standard, ensuring consistent shaft height and alignment across the MS2N06 family.