MS2N10-D1BFN-BMVG0-NNNNN-NN
MS2N Synchronous Servo Motors
The MS2N10-D1BFN-BMVG0-NNNNN-NN belongs to the MS2N Synchronous Servo Motors series from Bosch Rexroth Indramat. This brushless servo unit is specified for closed-loop speed and position tasks in automated assembly cells, gantry axes, and CNC stages where fast feedback and stiff torque control are critical.
The motor runs at a rated speed of 1500 1/min, a value that matches drive controllers designed for medium-speed production machinery. Thermal energy is removed by Self-cooling, so no external blower or liquid circuit is required. Motion is carried by a Standard bearing set that supports radial and axial loads within the catalog limits. Power and feedback lines exit through a rotatable Double cable connection M40 / M17, simplifying routing in compact cabinets. Position data come from a Hiperface encoder that combines 128 signal periods with a Multiturn – 4,096 revolutions absolute counter, allowing drives to recover axis position after power loss. The unit is supplied without a holding brake, so machines that must lock a vertical load need an external mechanical restraint. Encoder temperature sensing is handled by the integrated PT1000 element, enabling drive-based thermal monitoring.
Mechanical integration follows the B5 / IM3001 flange style, and the stator housing carries a Standard varnish, RAL 9005 black coating for basic environmental protection. The rotor is classified as Average inertia, balancing dynamic acceleration with smooth servo response. A Smooth, with shaft sealing ring output shaft prevents lubricant loss and blocks contaminant ingress at the coupling face. Dimensional data correspond to frame length D and the Motor Size Designation MS2N10, while flange and machining tolerances meet the series’ standard exactness rating. Overall design features are listed as standard, providing compatibility with the usual Rexroth cable sets and drive firmware without additional options.
Technical Specifications
Bearing Type
Standard bearing
Coating
Standard varnish, RAL 9005 black
Cooling Method
Self-cooling
Design Features
Standard
Electrical Connection
M40 Angle Plug, Turnable
Electrical Connection Type
Double cable connection M40 / M17, rotatable
Encoder Design
Multiturn
Encoder Performance
Standard - 128 Signal periods, Hiperface®
Encoder Type
Multiturn - 4,096 revolutions absolute
Flange Exactness
Standard
Frame Length
D
Holding Brake
Without holding brake
Mechanical Design
B5 / IM3001, PT1000
Motor Size Designation
MS2N10
Rated Speed
1500 1/min
Rotor Inertia
Average inertia
Shaft
Smooth, with shaft seal
Shaft Type
Smooth, with shaft sealing ring
Winding
1,500 min
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MS2N10-D1BFN-BMVG0-NNNNN-NN. 
Want to 
