MS2N10-F0BHA-CMAG0-NNNNN-NN
MS2N Synchronous Servo Motors
The MS2N10-F0BHA-CMAG0-NNNNN-NN is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MS2N Synchronous Servo Motors series. It provides precise torque generation for positioning, tracing, and interpolated motion in automated assembly cells and packaging machinery. This variant uses the MS2N10 frame with the F frame length and follows the B5 / IM3001 mechanical design, including a PT1000 temperature sensor embedded in the stator. These structural details let the motor mount directly to gearboxes or machine plates while enabling real-time thermal monitoring by the drive controller.
At a rated speed of 2000 1/min, the motor sustains continuous output without overheating. The rotor’s low inertia shortens acceleration times, so rapid start-stop cycles do not overload the servo drive. Position and velocity feedback come from an Advanced – 20-Bit, ACURO®Link encoder that supplies over one million counts per revolution. Because the feedback device is multiturn – 4,096 revolutions absolute, the axis knows its location immediately after power is restored. Heat is removed by a forced-ventilation axial 230 V / 50 Hz blower attached to the housing, keeping winding temperatures stable in cabinets where airflow is restricted.
A standard deep-groove bearing set supports the shaft and transmits radial forces to the housing. Cabling is simplified with a double cable connection M58 fixed / M17 rotatable, allowing the signal connector to swivel for strain relief inside tight routing ducts. Because the motor is delivered without a holding brake, static loads must be secured by regenerative torque or external clamps during power loss. A smooth, with shaft sealing ring output shaft prevents fluid ingress while providing a clean interface for backlash-free couplings. The external surfaces are finished with a standard varnish, RAL 9005 black coating that resists oil mist and matches other components in the series.
Technical Specifications
Bearing Type
Standard bearing
Coating
Standard varnish, RAL 9005 black
Cooling Method
Forced-ventilation axial 230 V / 50 Hz
Design Features
Standard
Electrical Connection
M58 Angle Plug, Side A
Electrical Connection Type
Double cable connection M58 fixed/ M17, rotatable
Encoder Design
Multiturn
Encoder Performance
Advanced - 20-Bit, ACURO®Link
Encoder Type
Multiturn - 4,096 revolutions absolute
Flange Exactness
Standard
Frame Length
F
Holding Brake
Without holding brake
Mechanical Design
B5 / IM3001, PT1000
Motor Size Designation
MS2N10
Rated Speed
2000 1/min
Rotor Inertia
Low inertia
Shaft
Smooth, with shaft seal
Shaft Type
Smooth, with shaft sealing ring
Winding
2,000 min
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MS2N10-F0BHA-CMAG0-NNNNN-NN. 
Want to 
