Pole Count: 10
Bearings: Standard
Flange Type: Standard
Shaft Specifications: DIN ISO 21940-32
Motor Disconnection Temperature: 145°C
Encoder Rotation Report: 4,096 mechanical rotations
Encoder Electrical Connection: M40/M17 rotatable double cable
Voltage Constant: 83.9V 1000min-1 +/-5%
Torque Constant: 1.38NmA +/-5% at 20°C
Frontal Centering Hole: DS M10 thread (Keyway and DIN 332-2 specification)
Brake Holding-Torque: 36Nm
Brake Maximum Switched Energy: 850J
Brake Check Mechanism: Software function or mechanically by hand
Motor Tolerance: N type
Bearings Lifetime: Dependent on grease service life
Shipping: Worldwide
Firmware: To be ordered separately
Gearbox Requirements: Oil-proof or closed lubrication-type only
Shaft Sealing Ring Requirement: No permanent contact with gearbox oil
Cooling Method: IC410 or self-cooling (EN 60034-6 specification)
Holding Brake Sensitivity: High temperatures and overvoltages
Holding Torque Measurement: Via torque wrench, only when de-energized.