MSK060B-0300-NN-M1-UG0-NNNN
MSK IndraDyn S Synchronous Motors
The MSK060B-0300-NN-M1-UG0-NNNN is an AC servo motor manufactured by Bosch Rexroth Indramat and assigned to the MSK IndraDyn S Synchronous Motors series. Classified by the vendor as an IndraDyn S synchronous servomotor, it supplies precise torque and speed control for numerically controlled machine tools, pick-and-place stations, and other automated axes that need compact rotary actuation.
This model follows the manufacturer’s standard mechanical design and is built on a 060 frame. Its length code B sets the active stack height, establishing the inertia and continuous torque range expected for mid-scale positioning tasks. Stator winding code 0300 defines the resistance and inductance so that IndraDrive inverters can deliver rated current without saturation. Thermal dissipation relies on natural convection, which means the mounting zone must allow unobstructed air movement instead of forced ventilation. A plain shaft output simplifies coupling with backlash-free clamp hubs and avoids stress concentrations associated with keyed interfaces.
The feedback subsystem employs an optical encoder that communicates through the Hiperface protocol. It generates 128 signal periods per revolution and incorporates a multiturn absolute counter, allowing controllers to read both fine position and complete turns after power cycling. The connector can be set at a rotatable, 240° angle so cable routing adapts to different cabinet layouts. Because the motor is supplied without a holding brake, external clamping or sustained drive torque is required to secure loads when power is removed. The standard construction, optical sensing method, and natural convection cooling together yield a servomotor suited for clean-machine environments where low maintenance and accurate motion feedback are priorities.
Technical Specifications
Continuous Current at Standstill 100 K
3.3 A
Continuous Torque at Standstill 100 K
5.5 Nm
Cooling
Natural convection
Design
Standard
Encoder Connector
Rotatable, 240°
Encoder Interface
Hiperface
Encoder Resolution
128 signal periods
Encoder Technology
Optical
Encoder Turn Type
Multiturn Absolute
Holding Brake
Without holding brake
Maximum Current
12.0 A
Maximum Torque
15.0 Nm
Motor Length
B
Motor Size
060
Product Type
IndraDyn S Synchronous Servomotor
Shaft Type
Plain shaft
Winding Code
0300
Winding Inductivity
73,000 mH
Frequently Asked Questions
Common Misspellings
Internal Product Review
The MSK050C-M1-UP0-NNNN synchronous servomotor from Bosch Rexroth features a compact 050 frame, Motor Length C, and natural convection cooling. It delivers 5.5 Nm continuous torque and uses an optical multiturn absolute Hiperface encoder. This motor suits high-speed indexing systems and automation requiring precise dynamic motion.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK060B-0300-NN-M1-UG0-NNNN. 
Want to 
