MSK061C-0300-NN-S1-UP0-NNNN

The MSK061C-0300-NN-S1-UP0-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Intended for industrial automation, the unit converts drive current into controlled torque and speed for positioning and process axes. It delivers servo-class performance for precise point-to-point or interpolated motion tasks in automated assembly, material transfer, and processing equipment.

With a frame classified as Motor Size 061, the stator and rotor dimensions match moderate-torque requirements while keeping overall mass low. Its length code C extends the active stack to increase continuous output without changing the mounting pattern. Heat is removed solely through natural convection, so the housing must be mounted where free airflow is available and no forced fan or liquid circuit is required. The electromagnetic system uses winding code 0300, defining wire gauge and turns for the rated voltage of the series. Rotor position feedback passes through the Hiperface digital link, and the sensor yields 128 signal periods per mechanical revolution, giving the drive controller fine increment resolution for smooth velocity loops.

The feedback subassembly relies on Optical scanning, which maintains positional accuracy over temperature drifts common in convection-cooled applications. Installation flexibility comes from the encoder plug that is Rotatable, 240°, letting the cable exit in the required direction inside compact cabinets. Mechanical power is transmitted through a shaft with a keyway, ensuring positive engagement with couplings or pulleys without relying on shrink fits. Because the motor is supplied without a holding brake, any static load must be secured by the drive’s torque or by an external brake. The overall construction follows the series’ Standard design, simplifying replacement across similar axis ratings.