MSK071C-0200-NN-M1-UG0-NNNN
MSK IndraDyn S Synchronous Motors
Technical Specifications
Cooling
Natural convection
Encoder Connector
Rotatable, 240°
Encoder Technology
Optical
Encoder Turn Type
Multiturn Absolute
Encoder Interface
Hiperface
Encoder Resolution
128 signal periods
Motor Length
C
Motor Size
071
Holding Brake
Without holding brake
Design
Standard
Product Type
IndraDyn S Synchronous Servomotor
Shaft Type
Plain shaft
Rated Speed Code
0200
Continuous Current at Standstill 100 K
6.1 A
Continuous Torque at Standstill 100 K
14.0 Nm
Maximum Current
23.4 A
Maximum Torque
44.0 Nm
Winding Inductivity
19,500 mH
Frequently Asked Questions
Does encoder resolution in this model limit accuracy during ultra-short motion profiles?
The encoder provides 128 signal periods per revolution. It supports basic high-resolution feedback but may not meet sub-micron positioning demands.
What should be considered when integrating this motor into vertical axes without regenerative braking?
It includes no holding brake. External mechanical locks or controlled stop strategies are required to secure vertical loads during power loss.
Will the MSK071C-0200-NN-M1-UG0-NNNN tolerate burst loads in fast-cycle indexing operations?
It delivers a peak torque of 44.0 Nm. This supports short, high-intensity load demands without compromising structural integrity.
How does torque behavior impact slow-speed performance in the MSK071C-0200-NN-M1-UG0-NNNN?
It provides 14.0 Nm continuous torque at standstill. This ensures stable holding and low-speed control under constant load.
Can thermal stress impact the MSK071C-0200-NN-M1-UG0-NNNN when installed in fanless drive enclosures?
It relies on natural convection for passive heat dissipation. Limited airflow may require thermal analysis to avoid excessive temperature rise.
Common Misspellings
MSK 071C-0200-NN-M1-UG0-NNNN
MSK-071C-0200-NN-M1-UG0-NNNN
MSK071C 0200 NN M1 UG0 NNNN
MSK071C-0200-NN-M1-UG0
MSK071C0200NNM1UG0NNNN
MSK07IC-0200-NN-MI-UG0-NNNN
MSKO71C-0200-NN-M1-UG0-NNNN
MSKO71C-O2OO-NN-M1-UGO-NNNN
MSK71C-0200-NN-M1-UG0-NNNN
Internal Product Review
The MSK071C-0200-NN-M1-UG0-NNNN synchronous servo motor is capable of reaching 44.0 Nm peak torque. It incorporates natural convection cooling, a Hiperface optical encoder, and 128 signal periods for accurate motion feedback. It is fully compatible with Bosch Rexroth HCS series drive controllers for seamless automation integration.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK071C-0200-NN-M1-UG0-NNNN.
Want to 
