MSK071C-0200-NN-S3-UG0-NNNN

The S3 denotes a single-turn capacitive Hiperface® encoder with 16 signal periods that gives resilient, low-drift absolute position per revolution and solid noise immunity. It simplifies startup homing and maintains accurate commutation even under electrical interference.

The 240° rotatable interface lets installers orient the connector to clear cable ducts, doors or moving axes, reducing bend stress and easing service. Its flexibility improves sealing integrity and routing in tight machine envelopes.

Its natural convection eliminates fans and hoses for reducing failure points and contamination risks around food, packaging or woodworking dust. It also keeps the motor footprint cleaner while meeting thermal steady-state needs in moderate load cycles.

The continuous 14 Nm supports holding and low-speed feed forces without thermal overload at 100 K spec conditions. Its 44 Nm peak provides headroom for acceleration bursts, cutter engagements or camming peaks before settling to continuous levels.

Its higher phase inductivity smooths current ripple at the inverter PWM frequency to aid torque linearity and reduces acoustic artifacts. Its drive current loops must be tuned with appropriate bandwidth to avoid phase lag and ensure dynamic stability.