The MSK071E-0450-FN-S1-UP2-NNNN is a high-performance industrial servomotor from Bosch Rexroth Indramat in the MSK IndraDyn S Synchronous Motors series, engineered for precision and durability. This Product Type: IndraDyn S Synchronous Servomotor features a compact Motor Size: 071 frame and a standardized Motor Length: E design to optimize integration into automation systems. With a Winding Code: 0450 and a rated torque constant of 1.29 Nm/A at 20 °C, it delivers exceptional torque density while maintaining a sound pressure level of approximately 75 dB(A). Encased in an IP65 protection class housing coated with 2K epoxy resin, this motor offers robust resistance to dust, water jets, diluted acids, and mineral oils. Its ambient operating temperature range from 0 to 40 °C ensures reliable performance in a variety of industrial environments.
Technical capabilities of the MSK071E-0450-FN-S1-UP2-NNNN include advanced thermal management and high-resolution feedback. The motor employs Cooling: Liquid cooling in conjunction with the Constraint: Requires Cooling FN feature to maintain optimal winding temperatures under continuous operation. Its Encoder Interface: Hiperface uses an Encoder Technology: Optical system with Encoder Resolution: 128 signal periods and a Encoder Turn Type: Singleturn design, ensuring precise position feedback. A Rotatable, 240° Encoder Connector simplifies cabling in tight spaces, while a substantial Winding Inductivity: 2,600 mH offers smooth current transitions and low electrical noise. The combination of these specifications guarantees rapid acceleration and high dynamic response in demanding motion-control applications.
Operational features and benefits focus on torque management and load-handling capabilities. At 100 K, this servomotor achieves a Continuous Current at Standstill: 24.4 A producing a Continuous Torque at Standstill: 28.0 Nm, and sustains a Maximum Current: 90.1 A yielding a Maximum Torque: 84.0 Nm for peak-duty cycles. An integrated Holding Brake: With holding brake, electrically-released supplies a Holding Brake Torque: 30 Nm to secure loads at standstill, enhancing safety during maintenance and power interruptions. The robust Shaft Type: Shaft with keyway transfers the motor’s kinetic energy efficiently to driven equipment, while the epoxy coating provides chemical resistance and optional varnish overcoat for extreme environments. These features combine to minimize downtime and extend service life under continuous industrial operation.
Integration into control architectures is streamlined by the motor’s Design: Standard flange interfaces compatible with IM B5, IM V1, and IM V3 mounting configurations. The MSK071E-0450-FN-S1-UP2-NNNN pairs seamlessly with Rexroth drive electronics, adapting to diverse factory automation setups. Its compact frame, liquid-cooling capability, and high-resolution Hiperface encoder support applications in robotics, packaging lines, CNC machinery, and material-handling systems. Engineers benefit from flexible installation, precise motion control, and reliable performance when incorporating this synchronous servomotor into advanced automation solutions.
Cooling
Liquid cooling
Encoder Connector
Rotatable, 240°
Encoder Interface
Hiperface
Encoder Resolution
128 signal periods
Encoder Technology
Optical
Encoder Turn Type
Singleturn
Motor Length
E
Motor Size
071
Constraint
Requires Cooling FN
Holding Brake
With holding brake, electrically-released
Holding Brake Torque
30 Nm
Design
Standard
Product Type
IndraDyn S Synchronous Servomotor
Shaft Type
Shaft with keyway
Winding Code
0450
Continuous Current at Standstill 100 K
24.4 A
Continuous Torque at Standstill 100 K
28.0 Nm
Maximum Current
90.1 A
Maximum Torque
84.0 Nm
Winding Inductivity
2,600 mH