MSK076C-0300-NN-M1-UG0-NNNN

MSK IndraDyn S Synchronous Motors

Rated 4.2 stars (10 total reviews)

MSK076C-0300-NN-M1-UG0-NNNN Series Image

In Stock, Ships Today

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The MSK076C-0300-NN-M1-UG0-NNNN servo motor from Bosch Rexroth Indramat is part of the MSK IndraDyn S Synchronous Motors series. It uses natural convection cooling, a standard design, IP65 protection rating, and a plain shaft for robust industrial performance. It delivers a continuous torque of 12 Nm at 60K overtemperature and a maximum torque of 43.5 Nm, with a torque constant of 1.84 Nm/A. The motor has a winding inductance of 12.6 mH and a resistance of 1.85 Ω at 20°C.

Technical Specifications

Cooling
Natural convection

Encoder Connector
Rotatable, 240°

Encoder Resolution
128 signal periods

Encoder Turn Type
Multiturn Absolute

Motor Length
C

Motor Size
076

Holding Brake
Without holding brake

Design
Standard

Product Type
IndraDyn S Synchronous Servomotor

Shaft Type
Plain shaft

Rated Speed Code
0300

Winding Inductance
12.6 mH

Voltage Constant
113 V/min

Torque Constant
1.84 Nm/A

Winding Resistance (20 degrees C)
1.85 Ohms

Continuous Torque (60K Overtemperature)
12 Nm

Protection Rating
IP65

Maximum Torque
43.5 Nm

Frequently Asked Questions

What advantages does the multiturn absolute encoder (128 signal periods) provide on the MSK076C-0300-NN-M1-UG0-NNNN during commissioning and after power interruptions?

Its absolute feedback retains position across cycles to eliminate homing and reduces recovery time. Its 128 signal periods supports fine interpolation for smooth motion and better quantization margins during high-resolution contouring.

How does the 240° rotatable connector on MSK076C-0300-NN-M1-UG0-NNNN aid machine layout and EMC practices?

It permits optimal cable exit to meet bend-radius limits to avoid pinch points and separate power from feedback. Its cleaner routing reduces common-mode coupling and enables correct shield terminationsfor improving EMC performance.

How should the 1.84 Nm/A torque constant and 12.6 mH winding inductance of MSK076C-0300-NN-M1-UG0-NNNN guide drive sizing and control tuning?

The torque constant sets required current for target torque for informing amplifier current rating and cabling. Its inductance influences current-loop bandwidth and PWM ripple, while the drives with sufficient voltage headroom achieve faster dynamic regulation.

What does the IP65 rating imply for MSK076-series deployment, and which sectors commonly specify these motors?

The IP65 indicates dust-tight construction and resistance to water jets when connectors are properly mated. Its typical uses include automotive assembly, packaging, manufacturing cells and woodworking equipment within modern factory automation.

How do 12 Nm continuous (60 K overtemperature) and 43.5 Nm maximum torque translate to pick-and-place or indexing profiles on MSK076C-0300-NN-M1-UG0-NNNN?

The continuous torque sets sustainable RMS load, while maximum torque covers brief accelerations and disturbances. Its profile should keep thermal RMS under 12 Nm while exploiting 43.5 Nm momentarily for acceleration and settling.

Common Misspellings

Internal Product Review

Bosch Rexroth Indramat designs the servo motor MSK076C-0300-NN-M1-UG0-NNNN that uses natural-convection cooling and its housing is rated IP65. It comes with a plain shaft and for feedback it relies on multiturn absolute encoder of 128 signal periods. Its feedback connects through a 240° rotatable connector for aiding integration. This unit delivers 12 Nm of continuous torque at 60 K, 43.5 Nm peak, 1.84 Nm/A torque constant and it possess 12.6 mH of inductance.