MSK076C-0300-NN-M1-UP0-NNNN-SA001

It preserves multi-turn absolute position across power cycles to eliminate homing and shortening cycle times. Its optical Hiperface unit with 128 signal periods supports fine interpolation and smooth closed-loop control with IndraDrive.

It lets you orient cable exit to minimize bend radius, ease cable strain-relief and improve access in tight machines to reduce connector wear and maintenance time without re-terminating harnesses.

The hubs per DIN 6885-1 should be choosed to match key geometry and shear capacity for ensuring concentricity and torque transfer. Its shaft seal helps limit fluid ingress at the journal when paired with appropriate couplings.

Its data show ~12 Nm at 60 K overtemperature and 13.5 Nm at 100 K at standstill, with ~43.5 Nm peak for transient loads. It is used with duty-cycle and ambient assumptions from the planning manual.

It lists up to ~4700 rpm max speed. Its drive speed limits and STO/overspeed configuartion and supervision relative to load inertia and mechanics is important.