MSK076C-0300-NN-S1-UP0-NNNN, Bosch Rexroth Indramat, Motors series servo motor delivers high-performance motion control for industrial automation. The drive unit provides a continuous torque of 12 Nm at 60 K and 13.5 Nm at 100 K, with a maximum torque capacity of 43.5 Nm to accommodate sudden load peaks. It features a rotor inertia of 0.00430 kgxm^2 and supports a maximum current of 32.4 A for rapid acceleration and precise positioning. Four pole pairs ensure efficient torque generation across a speed range up to 4,700 min⁻¹.
Engineered with Natural convection Cooling, the motor uses a Singleturn Encoder Turn Type and Bosch Rexroth’s proprietary Hiperface Encoder Interface coupled via a Rotatable, 240° Encoder Connector for flexible installation. A Thermal Time Constant of 25 minutes and Winding Inductivity of 12.6 mH manage thermal dynamics under sustained operation. Key electrical parameters include a Voltage Constant at 20 °C of 113 V/min⁻¹ and a Torque Constant at 20 °C of 1.84 Nm/A, with a Winding Code 0300 delivering a Standstill Current (60 K) of 7.2 A and Standstill Torque (100 K) of 13.5 Nm. The motor’s Insulation Class of 155 per DIN EN 60034-1 and Shaft Type with keyway ensure compliance with rigorous safety and longevity standards.
As part of the rugged IndraDyn S Synchronous Servomotor Product Type, this Standard Design unit omits a holding brake to reduce mechanical complexity and weighs approximately 13.8 kg for straightforward integration into compact drive cabinets. An IP65 rating shields internal components from dust and water ingress, while vibration tolerance up to 10 m/s² in axial and radial axes safeguards encoder accuracy. Bosch Rexroth’s MSK076C-0300-NN-S1-UP0-NNNN streamlines commissioning and enhances system reliability in high-demand industrial processes.
Cooling
Natural convection
Encoder Connector
Rotatable, 240°
Encoder Interface
Hiperface
Encoder Turn Type
Singleturn
Motor Length
C
Motor Size
076
Holding Brake
Without holding brake
Design
Standard
Product Type
IndraDyn S Synchronous Servomotor
Shaft Type
Shaft with keyway
Winding Code
0300
Thermal Time Constant
25 minutes
Winding Inductivity
12.6 mH
Standstill Torque (100 K)
13.5 Nm
Standstill Current (60 K)
7.2 Amp
Insulation Class
155
Voltage Constant at 20 degrees C
113 V/min-1
Torque Constant at 20 degrees C
1.84 Nm/A