MSK100B-0200-NN-M2-BP2-RNNN
MSK IndraDyn S Synchronous Motors
Technical Specifications
Cooling
Natural convection
Power Connector
B-Side
Encoder Technology
Optical
Encoder Turn Type
Multiturn Absolute
Encoder Interface
EnDat2.1
Encoder Resolution
2048 signal periods
Motor Length
B
Motor Size
100
Holding Brake
With holding brake, electrically-released
Holding Brake Torque
70 Nm
Constraint
Not available with length A
Design
Increased concentricity
Product Type
IndraDyn S Synchronous Servomotor
Shaft Type
Shaft with keyway
Rated Speed Code
0200
Continuous Current at Standstill 100 K
17.3 A
Continuous Torque at Standstill 100 K
33.0 Nm
Maximum Current
66.2 A
Maximum Torque
102.0 Nm
Winding Inductivity
7,600 mH
Frequently Asked Questions
What are the thermal/installation implications of the “NN” natural-convection cooling on MSK100B-0200-NN-M2-BP2-RNNN?
The conduction surface radiation carry heat to ambient, so cabinet and machine airflow clearances matter to preserve the 33 Nm standstill rating. It allow blower or liquid upgrades if duty cycle later requires added thermal headroom.
How does the M2 EnDat 2.1 multiturn system in MSK100B-0200-NN-M2-BP2-RNNN enhance indexing or synchronized motion?
It provides absolute position over 4,096 revolutions with 2048 signal periods for enabling fast homing-free startup and tight phase alignment. Its deterministic digital link simplifies diagnostics and supports high loop gains with low interpolation error.
Why specify the electrically released 70 Nm holding brake on MSK100B-0200-NN-M2-BP2-RNNN?
The spring-applied brake prevents axis drift on vertical loads or during E-stop for reducing risk while powered down. Its electrical release (24 V DC) integrates easily with safety relays and allows controlled stop/hold sequencing.
How do increased concentricity and a keyed shaft on MSK100B-0200-NN-M2-BP2-RNNN influence coupling precision and bearing life?
The tighter run-out (per DIN 42955 references for MSK) minimizes radial vibration for improving servo bandwidth and surface finish on machine tools. Its keyway provides positive torque transmission and repeatable phasing for gearboxes or timing pulleys.
What does the “BP2” B-side power connector mean for cable routing and EMC on MSK100B-0200-NN-M2-BP2-RNNN?
The B-side placement helps separate motor-power from feedback runs and can shorten conduits in certain layouts. Its connectors are rotatable (A/B, L/R) for aiding strain-relief and minimizing loop area for conducted/radiated emissions.
Common Misspellings
MSK100B0200NNM2BP2RNNN
MSK100B 0200 NN M2 BP2 RNNN
MSK-100B-0200-NN-M2-BP2-RNNN
Internal Product Review
The IndraDyn S Synchronous Servomotor MSK100B-0200-NN-M2-BP2-RNNN by Bosch Rexroth offers 33.0 Nm continuous torque and 102.0 Nm maximum torque, supported by a 70 Nm electrically-released holding brake. It uses an optical multiturn absolute encoder with EnDat2.1 interface and 2048 signal periods. This motor is suited for CNC machinery, robotics, and packaging industry automation.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK100B-0200-NN-M2-BP2-RNNN.
Want to 
