MSK100C-0300-NN-S3-BP0-NNNN
MSK IndraDyn S Synchronous Motors
The Bosch Rexroth Indramat MSK100C-0300-NN-S3-BP0-NNNN from the MSK IndraDyn S Synchronous Motors series is a Standard IndraDyn S Synchronous Servomotor designed for precision motion control. This motor size 100 unit features a motor length C housing and a winding code 0300 to deliver optimal torque density. Built to a Design standard and weighing 45.1 kg, the servomotor incorporates a shaft with keyway for secure coupling. Its sealed enclosure provides an ingress protection rating of IP65, ensuring robust performance in challenging industrial environments.
The MSK100C-0300-NN-S3-BP0-NNNN supports both Natural convection and optional surface cooling methods to manage thermal loads. At a 100 K overtemperature rise, it provides a continuous torque at standstill 100 K of 43.5 Nm with a continuous current at standstill 100 K of 27.0 A. Peak demands are met by a maximum torque of 148.0 Nm and a maximum current of 97.2 A, while the winding inductivity of 4,200 mH stabilizes current surges and reduces electrical noise. The unit is delivered without holding brake, simplifying maintenance and reducing weight.
Precision feedback is achieved through a capacitive singleturn encoder featuring the Hiperface protocol and 16 signal periods resolution, ideal for high-dynamic applications. Electrical connections are centralized on the B-Side power connector, streamlining cabinet layouts and reducing installation time. With a torque constant of 1.94 Nm/A at 20 °C and a rated speed of 4500 RPM, the MSK100C-0300-NN-S3-BP0-NNNN delivers consistent, high-performance operation across a broad range of automation tasks.
Technical Specifications
Cooling
Natural convection
Power Connector
B-Side
Encoder Interface
Hiperface
Encoder Resolution
16 signal periods
Encoder Technology
Capacitive
Encoder Turn Type
Singleturn
Motor Length
C
Motor Size
100
Holding Brake
Without holding brake
Design
Standard
Product Type
IndraDyn S Synchronous Servomotor
Shaft Type
Shaft with keyway
Winding Code
0300
Continuous Current at Standstill 100 K
27.0 A
Continuous Torque at Standstill 100 K
43.5 Nm
Maximum Current
97.2 A
Maximum Torque
148.0 Nm
Winding Inductivity
4,200 mH
Frequently Asked Questions
What benefits arise from the B-side connector placement in the MSK100C-0300-NN-S3-BP0-NNNN?
Side-mounted output enables rear-aligned cable management, preserving clearance in crowded panels and minimizing strain on conduit paths during long-term machine operation.
Why does the MSK100C-0300-NN-S3-BP0-NNNN employ natural convection instead of forced ventilation?
Passive surface cooling removes excess heat from the stator uniformly, extending bearing life and avoiding contamination that often occurs with fan systems.
How does winding inductivity influence current stability in the MSK100C-0300-NN-S3-BP0-NNNN?
4,200 mH inductivity moderates transient spikes in phase current, reducing vibration and ensuring predictable torque generation under fluctuating load demand.
Why is capacitive feedback selected for the MSK100C-0300-NN-S3-BP0-NNNN?
Its immunity to light or oil exposure preserves accuracy in industrial areas where optical sensors could degrade or lose calibration under contaminants.
What does the singleturn system contribute to start-up alignment in the MSK100C-0300-NN-S3-BP0-NNNN?
It resets mechanical zero each power-on cycle, providing immediate synchronization without stored revolution data, simplifying controller referencing procedures.
Common Misspellings
MSK100C0300NNS3BP0NNNN
MSK100C 0300 NN S3 BP0 NNNN
MSK-100C-0300-NN-S3-BP0-NNNN
Internal Product Review
The MSK100C-0300-NN-S3-BP0-NNNN integrates a B-side power connector for compact machine layouts. Its natural convection cooling and capacitive singleturn encoder combine to maintain positional reliability without requiring auxiliary fans.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK100C-0300-NN-S3-BP0-NNNN.
Want to 
