MSK100D-0200-NN-S1-BP2-NNNN

Bosch Rexroth Indramat manufactures the MSK100D-0200-NN-S1-BP2-NNNN. This unit belongs to the MSK IndraDyn S Synchronous Motors series and is classified by the company as an IndraDyn S synchronous servomotor for precise position and velocity control on automated production axes.

The motor relies on natural convection to remove heat, so no external fan or liquid circuit is required. A optical Hiperface feedback system is fitted and delivers 128 signal periods in a singleturn format, giving absolute position data to the drive controller. Standard mechanical design and the 0200 winding code set electrical constants suited to medium-voltage IndraDrive amplifiers. The product is listed as not available with length A, and the version supplied here therefore uses the longer D build. Power enters through a B-side connector that positions the cable away from the load end, and a shaft with keyway provides positive torque transmission.

The integrated holding brake is electrically released and develops 70 Nm of static torque so suspended loads stay secure when power is removed. Choosing the D length in frame size 100 increases thermal mass and continuous output without altering the mounting interface. The drive end employs a shaft with keyway, giving a defined shear plane and preventing slippage under reversing duty cycles. These mechanical features, combined with the standard build constraint that excludes length A, make the motor suitable for medium-inertia servo axes where secure parking, enlarged thermal capacity, and keyed coupling are required.