MSK101D-0300-FN-M1-AG0-NNNN
MSK IndraDyn S Synchronous Motors
Technical Specifications
Cooling
Liquid cooling
Power Connector
A-Side
Encoder Technology
Optical
Encoder Turn Type
Multiturn Absolute
Encoder Interface
Hiperface
Encoder Resolution
128 signal periods
Motor Length
D
Motor Size
101
Holding Brake
Without holding brake
Design
Standard
Product Type
IndraDyn S Synchronous Servomotor
Shaft Type
Plain shaft
Rated Speed Code
0300
Continuous Current at Standstill 100 K
34.9 A
Continuous Torque at Standstill 100 K
57.0 Nm
Maximum Current
137.7 A
Maximum Torque
160.0 Nm
Winding Inductivity
3,200 mH
Frequently Asked Questions
How does the continuous torque at standstill (57 Nm) affect acceleration planning in CNC axes?
That continuous torque defines how much load (inertia or friction) the axis can hold without moving, and it limits available acceleration at zero speed. In motion planning you should ensure the torque demand never exceeds 57 Nm for prolonged periods.
What happens to thermal performance when the motor is used under intermittent duty rather than steady duty?
Under pulsed or S3 duty, the motor will soak higher thermal stress; repeated cycling reduces permissible torque peaks due to heating time constants. Always refer to Rexroth’s duty cycle curves to derate the 160 Nm peak accordingly.
What are the implications of the motor’s winding inductance (~3,200 mH) on the drive current dynamics?
High inductance slows the current rise time in response to voltage commands, thereby limiting how fast the drive can push torque changes. So for very fast transients, ensure your amplifier can supply the required voltage headroom.
How should a B2B system designer size the drive current capacity for safe operation?
The drive should comfortably handle both the continuous current at standstill (34.9 A) and transient demands up to 137.7 A, with margin for peaks. Choose a servo amplifier with ability to supply those peaks (with back-EMF headroom) without saturation.
What is the bearing life expectation under normal operating loads and how is it calculated?
When operated within permissible axial/radial loads and ambient temperature limits, the L₁₀ bearing life is specified at ~30,000 hours per Bosch’s project planning manual.
Common Misspellings
MSK101D0300FNM1AG0NNNN
MSK101D 0300 FN M1 AG0 NNNN
MSK-101D-0300-FN-M1-AG0-NNNN
Internal Product Review
The IndraDyn S Synchronous Servomotor MSK101D-0300-FN-M1-AG0-NNNN from Bosch Rexroth features liquid cooling, a plain shaft, and an optical multiturn absolute encoder with Hiperface interface. It delivers 57.0 Nm continuous torque and 160.0 Nm peak torque with a rated current of 34.9 A. This motor is ideal for use in CNC machinery, robotics, and packaging automation systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK101D-0300-FN-M1-AG0-NNNN.
Want to 
