MSK101D-0300-NN-M1-LG2-NNNN
MSK IndraDyn S Synchronous Motors
Technical Specifications
Cooling
Natural convection
Power Connector
Left-Side
Encoder Technology
Optical
Encoder Turn Type
Multiturn Absolute
Encoder Interface
Hiperface
Encoder Resolution
128 signal periods
Motor Length
D
Motor Size
101
Holding Brake
With holding brake, electrically-released
Holding Brake Torque
70 Nm
Constraint
Requires Cooling FN
Design
Standard
Product Type
IndraDyn S Synchronous Servomotor
Shaft Type
Plain shaft
Rated Speed Code
0300
Continuous Current at Standstill 100 K
34.9 A
Continuous Torque at Standstill 100 K
57.0 Nm
Maximum Current
137.7 A
Maximum Torque
160.0 Nm
Winding Inductivity
3,200 mH
Frequently Asked Questions
What are the implications of maximum current of 137.7 A for drive design?
Your drive must supply short bursts of 137.7 A without voltage drop or trips, so ensure adequate bus capacitor sizing and cooling in the drive.
How does the left-side power connector affect cable routing in multi-axis systems?
A-side (left-side) connector placement simplifies cabling in some arrangements but may complicate others; ensure clearance and shielding to minimize feedback noise.
How does ambient temperature limit performance for this motor?
The motor is rated for ambient operation up to 40 °C; above that, continuous current and torque must be derated to avoid overheating.
How does the 160 Nm peak torque translate into acceleration performance?
The torque-to-inertia ratio (peak torque divided by rotor inertia) determines acceleration; with this motor’s rotor inertia (~0.00932 kg·m²), it can deliver brisk accelerations for moderate loads.
What is the practical significance of a 128 signal-period optical multiturn Hiperface encoder?
It gives fine resolution over 4096 turns with absolute positioning, simplifying homing and ensuring position integrity after power loss.
Common Misspellings
MSK101D0300NNM1LG2NNNN
MSK101D 0300 NN M1 LG2 NNNN
MSK-101D-0300-NN-M1-LG2-NNNN
Internal Product Review
The MSK101D-0300-NN-M1-LG2-NNNN IndraDyn S Synchronous Servomotor from Bosch Rexroth features a plain shaft, 160 Nm maximum torque, and a multiturn absolute optical encoder with Hiperface interface. It uses natural convection cooling and includes a left-side power connector and an electrically-released holding brake with 70 Nm torque. Ideal for use in packaging, robotics, and metal forming industries needing accurate, consistent motion control.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK101D-0300-NN-M1-LG2-NNNN.
Want to 
