R911311472 (MSK100B-0200-NN-M2-AP1-RNNN)

Name: R911311472 (MSK100B-0200-NN-M2-AP1-RNNN)
Brand: Indramat Motors
SKU: MSK100B-0200-NN-M2-AP1-RNNN
Price: 923.00 USD
Availability: InStock
Rating: 4.7 (6 reviews)

MSK IndraDyn S Synchronous Motors

Rated 4.7 stars (6 total reviews)

Front Right

In-Stock, Ships 3-5 Days

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
sales@indramat-usa.com

The R911311472 (MSK100B-0200-NN-M2-AP1-RNNN) is a synchronous servo motor from the MSK series, manufactured by Bosch Rexroth Indramat. This motor features a 100 size and B length, with a winding code of 0200, and is cooled by natural convection. It includes a multiturn absolute optical encoder (EnDat2.1) with 2048 signal periods, a shaft with keyway and sealing ring compliant with DIN 6885-1, and an A-side electrical power connector. The holding brake is electrically released, delivering 32 Nm torque. The motor reaches a maximum speed of 4100 rpm, provides up to 102.0 Nm maximum torque with a peak current of 66.2 A, and continuous torque of 33.0 Nm at 17.3 A (100 K). It possesses an IP65 protection rating and insulation class EN 60034-1-F. The design incorporates increased concentricity and supports axial runout according to DIN 42955 specifications, with a winding inductivity of 7,600 mH.

Technical Specifications

Motor Size
100

Motor Length
B

Winding Code
0200

Cooling Mode
Natural Convection

Shaft
DIN 6885-1 with sealing ring

Connector
A-side

Design
Axial runout in compliance with DIN 42955

Maximum Speed
4100

Degree of Protection
IP 65

Insulation
EN 60034-1-F

Operating Temperature
Up to 40 degrees Celsius

Type
IndraDyn S servo moto

Frequently Asked Questions

How does the 7,600 mH winding inductivity influence current ripple and torque bandwidth when PWM frequency is limited by the drive?

The higher inductivity attenuates PWM ripple for improving low-speed torque smoothness and reducing acoustic artifacts. However, the electrical time constant increases that limits achievable current-loop bandwidth.

What do the 17.3 A continuous and 66.2 A peak ratings imply for short-cycle acceleration using MSK100B-0200-NN-M2-AP1-RNNN?

Its peak current allows ~102 Nm instantaneous torque for rapid speed ramps and step-and-settle indexing, while its continuous current sustains thermal steady-state. Its inertia ratio and jerk limits exploits peak torque while controlling overshoot and thermal load.

How does the electrically-released 32 Nm holding brake on MSK100B-0200-NN-M2-AP1-RNNN contribute to vertical-axis safety and startup behavior?

The de-energized application secures Z-axes against gravity when power is removed and during e-stops for aiding safe state retention. It is for holding/parking, not dynamic braking; verify brake torque exceeds reflected load plus friction.

For the keyed shaft on MSK100B-0200-NN-M2-AP1-RNNN, what practices minimize backlash/fretting when coupling to pulleys or gearheads?

Its proper keyseat tolerances with axial clamping maintains balance grade and validate permissible radial/axial loads. Its misalignment raises micromotions that accelerate fretting and can degrade encoder quality.

What integration advantages does an A-side power connector provide when standardizing multi-axis wiring around MSK100B-0200-NN-M2-AP1-RNNN?

Its connector orientation simplifies harness replication, cable tray routing and segregation from feedback lines for EMC. It also improves service access and repeatable bend radii for reducing installation variability across identical axes.

Common Misspellings

MSK 100B-0200-NN-M2-AP1-RNNN

MSK-100B-0200-NN-M2-AP1-RNNN

MSK100B 0200 NN M2 AP1 RNNN

MSK100B-0200-NN-M2-AP1

MSK100B0200NNM2AP1RNNN

MSK1OOB-O2OO-NN-M2-AP1-RNNN

MSKI00B-0200-NN-M2-API-RNNN

Internal Product Review

The MSK100B-0200-NN-M2-AP1-RNNN servomotor comes in IP65 sealed housing and possess an EnDat 2.1 multiturn encoder that offers 2048 periods. It has a specified size-100/Length-B mechanics and its shaft has a keyway design. Its increased concentricity enhances torque transmission and alignment, it offers 33 Nm continuous and 102 Nm peak for supporting applications in machine tools, packaging and paper/printing systems.