R911312441 (MSK076C-0300-NN-S1-UP0-NNNN)

What does the 1.84 Nm/A torque constant mean for drive sizing on the MSK076C-0300-NN-S1-UP0-NNNN?

It directly links phase current to produced torque; ~6.5 A ideally yields ~12 Nm before thermal effects. Its rated standstill current 7.2 A at 60 K shows the permissible thermal envelope for continuous operation.

Why select Singleturn Hiperface on MSK076C-0300-NN-S1-UP0-NNNN instead of multiturn or Hiperface DSL?

The singleturn design gives absolute position within one revolution for fast commutation/homing without gear-based turns counting. Its classic Hiperface (SICK) provides analog Sin/Cos plus a serial channel; DSL is a later all-digital single-cable variant if your drive supports it.

Which applications leverage 4 pole pairs and 4,700 min⁻¹ on MSK076C-0300-NN-S1-UP0-NNNN?

Its four pole pairs help smooth torque production and control bandwidth to support precise indexing at moderate top speed. It aligns with machine tools, printing/paper handling, packaging and metal-forming duty cycles cited for IndraDyn S MSK motors.

How does the 0.00430 kg·m² rotor inertia affect servo tuning for MSK076C-0300-NN-S1-UP0-NNNN?

Its moderate inertia eases loop tuning and helps reject load disturbances without excessive current ripple. Its 32.4 A peak enables crisp acceleration profiles on mid-mass axes without overshoot-prone ratios.

Is IP65 adequate for dusty or wash-down environments for this motor?

The IP65 is dust-tight and resists low-pressure water jets to fit on many plant floors. For aggressive wash-down or chemicals, consider stainless options or higher protection.

MSK76C-0300-NN-S1-UP0-NNNN

MSK 076C-0300-NN-S1-UP0-NNNN

MSK-076C-0300-NN-S1-UP0-NNNN

MSK076C 0300 NN S1 UP0 NNNN

MSK076C-0300-NN-S1-UP0

MSK076C-0300-NN-SI-UP0-NNNN

MSK076C0300NNS1UP0NNNN

MSKO76C-0300-NN-S1-UP0-NNNN

MSKO76C-O3OO-NN-S1-UPO-NNNN

msk076c-0300-nn-s1-up0-nnnn

MSK076C0300NNS1UP0NNNN

MSK076C 0300 NN S1 UP0 NNNN

The Rexroth Indramat’s MSK076C-0300-NN-S1-UP0-NNNN servo motor delivers 12 Nm torque at 60 K and 13.5 Nm at 100 K, while its peak torque value is specified as 43.5 Nm. Its operating angular speed is 4700 min⁻¹ and its torque constant is 1.84 Nm/A. The motor is composed of four pole pairs and it uses a singleturn Hiperface encoder for feedback. It is IP65 protected and possess a keyway shaft that makes it ideal for application like packaging, printing, metal forming and machine tools.