R911312442 (MSK076C-0300-NN-S1-UP1-NNNN)

Why is the 12,600 mH winding inductivity valuable on MSK076C-0300-NN-S1-UP1-NNNN for low-speed operation?

The higher inductivity attenuates PWM ripple for smoothing phase current and reducing torque ripple. It also broadens current-loop stability margins to aid precise creep moves and contouring under high inertia loads.

How does the singleturn optical Hiperface encoder in MSK076C-0300-NN-S1-UP1-NNNN enhance commutation and position fidelity?

The hybrid Hiperface scheme combines analog sine/cosine tracks with a digital RS-485 channel for enabling fine interpolation and parameter readout. Its architecture reduces quantization noise and preserves phase accuracy at low speeds.

How does the electrically-released 11 Nm holding brake on MSK076C-0300-NN-S1-UP1-NNNN support vertical axes?

The brake engages when de-energized to lock the shaft for preventing unintended motion during power loss. An electrical release signal frees the rotor to enable controlled homing and gravity-axis hold.

How does the 240° rotatable power/feedback connector on MSK076C-0300-NN-S1-UP1-NNNN aid tight machine builds?

Its adjustable orientation eases cable routing to meet bend-radius constraints and minimize strain near moving carriages. It also helps segregate motor and feedback paths to manage EMC coupling.

What coupling guidance applies to the keyed shaft on MSK076C-0300-NN-S1-UP1-NNNN in backlash-critical drives?

The keyway prevents hub slip under transient torque; use zero-backlash couplings and fit tolerances per ISO H7/k6. It is important to verify permissible radial/axial loads against the Rexroth shaft-load charts before sizing.

MSK 076C-0300-NN-S1-UP1-NNNN

MSK-076C-0300-NN-S1-UP1-NNNN

MSK076C 0300 NN S1 UP1 NNNN

MSK076C-0300-NN-S1-UP1

MSK076C-0300-NN-SI-UPI-NNNN

MSK076C0300NNS1UP1NNNN

MSKO76C-0300-NN-S1-UP1-NNNN

MSKO76C-O3OO-NN-S1-UP1-NNNN

msk076c-0300-nn-s1-up1-nnnn

MSK076C0300NNS1UP1NNNN

MSK076C 0300 NN S1 UP1 NNNN

MSK76C-0300-NN-S1-UP1-NNNN

The servo motor MSK076C-0300-NN-S1-UP1-NNNN from Rexroth is equipped with a singleturn optical Hiperface encoder and 240° rotatable connector. It has an electrically released brake system and its size is specified as 076, with length C. This motor uses natural-convection method to stay in ambient thermal range and it delivers 13.5 Nm of torque, while uses 8.1 A of standstill current. Its maximum attainable torque is 43.5 Nm and it is utilized in packaging and printing line systems.