R911312444 (MSK076C-0300-NN-S2-UP1-RNNN)

How does the EnDat 2.1 singleturn encoder on MSK076C-0300-NN-S2-UP1-RNNN improve servo feedback determinism and wiring simplicity?

The EnDat 2.1 is a digital, bidirectional serial interface that carries absolute position and parameters over just a few conductors for simplifying harnessing and EMI management. Its singleturn feedback ensures precise absolute angle within one revolution without homing.

What application niches benefit from the 11 Nm electrically released holding brake on product code MSK076C-0300-NN-S2-UP1-RNNN?

The released-type brake provides secure static holding for vertical Z-axes, indexers or conveyor tensioning when power is removed for preventing load drift. It’s well suited to packaging heads, pick-and-place gantries and woodworking spindles.

How does the 240° rotatable encoder connector aid cabinet and machine integration for MSK076C-0300-NN-S2-UP1-RNNN?

The swivel connector allows stress-free cable exit optimization for reducing bend radius issues and facilitating tool-less reorientation during commissioning. It also improves serviceability in dense multi-axis racks and articulated robots.

How does the shaft with keyway (DIN 6885-1) on MSK076C-0300-NN-S2-UP1-RNNN influence coupling selection and backlash control?

Its keyed shafts simplifies rigid hub coupling and pulley mounting while providing torque-safe transmission without shrink-fit tooling. Its zero-backlash beam or disk couplings maintain positioning fidelity.

For MSK076C-0300-NN-S2-UP1-RNNN, how does the winding inductivity of 12,600 mH interact with current loop bandwidth and drive tuning?

The higher phase inductivity filters current ripple but demands appropriate current-loop bandwidth and voltage margin from the drive. Its PI current regulation is important to maintain dynamic torque response without overshoot.

MSK 076C-0300-NN-S2-UP1-RNNN

MSK-076C-0300-NN-S2-UP1-RNNN

MSK076C 0300 NN S2 UP1 RNNN

MSK076C-0300-NN-S2-UP1

MSK076C-0300-NN-S2-UPI-RNNN

MSK076C0300NNS2UP1RNNN

MSKO76C-0300-NN-S2-UP1-RNNN

MSKO76C-O3OO-NN-S2-UP1-RNNN

MSK76C-0300-NN-S2-UP1-RNNN

The Indramat’s MSK076C-0300-NN-S2-UP1-RNNN servomotor possess an optical EnDat 2.1 singleturn encoder feedback and uses natural-convection cooling. It has an increased concentricity and uses a keyed shaft. This motor generates 43.5 Nm of peak torque and it is equipped with a holding brake of 11 Nm torque that is of an electrically released design to suit packaging, woodworking, automotive automation, assembly lines and general manufacturing.