R911316320 (MSK100B-0400-NN-M1-AG0-NNNN)
MSK IndraDyn S Synchronous Motors
Technical Specifications
Product
Servo Motor
Motor Size
100
Motor Length
B
Winding Code
300
Cooling System
Natural Convection
Encoder
Optical, Singleturn Hiperface with 128 increments
Connector
Electrical, B-side
Shaft
With Keyway per DIN 6885-1, Sealing Ring
Holding Brake
None
Design
None
Operating Temperature Range
0 to 40 degrees
Installation Altitude Range
0 to 1000 meters
Load Capacity
Can accommodate 90% of light loads
Torque to Inertia Ratio
High
Noise Level
Less than 75dB at high speeds
Maximum Torque
102.0Nm
Number of Pole Pairs
4
Maximum Speed
4750min-1
Maximum Current
78.3A.
Frequently Asked Questions
How does the MSK100B-0400-NN-M1-AG0-NNNN maintain accuracy during repeated start-stop cycles in pick-and-place modules?
Its precise Hiperface encoder and stable winding design ensure the motor consistently delivers correct positioning, even under frequent acceleration and deceleration.
Which components are most critical to inspect during routine maintenance to prevent unexpected downtime?
Encoder connectors, cooling paths, and the plain shaft coupling should be checked regularly to avoid thermal stress or mechanical wear.
How does natural convection cooling affect performance in continuous high-speed textile automation?
It passively dissipates heat, keeping winding temperatures stable, which prevents thermal drift and allows the motor to operate reliably for extended periods.
In case of peak load conditions up to 102 Nm, how does the motor protect itself from overstress?
The motor manages high currents through its 3,100 mH winding inductivity, distributing thermal and mechanical loads to prevent damage.
What installation advantages does the plain shaft and A-side connector design provide for compact assembly lines?
It enables straightforward mechanical coupling and flexible wiring, reducing setup time while maintaining stable torque transmission.
Common Misspellings
MSK100B0400NNM1AG0NNNN
MSK100B 0400 NN M1 AG0 NNNN
msk100b-0400-nn-m1-ag0-nnnn
MSK100B0400NNM1AG0NNNN
MSK100B 0400 NN M1 AG0 NNNN
MSK-100B-0400-NN-M1-AG0-NNNN
Internal Product Review
The MSK100B-0400-NN-M1-AG0-NNNN by Bosch Rexroth Indramat integrates a Hiperface multiturn encoder with 128 signal periods, enabling accurate multi-axis synchronization. Its 3,100 mH winding inductivity and 106.7 A peak current ensure rapid torque response. Widely used in pick-and-place modules, textile automation, and electronic assembly lines.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK100B-0400-NN-M1-AG0-NNNN.
Want to 
