R911317820 (MSK100B-0200-NN-M2-AP0-RNNN)

How do the 33 Nm continuous and 102 Nm maximum torque ratings of MSK100B-0200-NN-M2-AP0-RNNN inform drive selection?

Its current limits match 17.3 A continuous and ~66 A peak to achieve stated torques within the motor’s thermal model. It is important to verify duty cycle against speed-torque curves and application inertia.

How does the A-side power connector orientation on MSK100B-0200-NN-M2-AP0-RNNN influence cabinet and cable routing?

The MSK motors use standardized, separable power/encoder connectors. Its A-side orientation eases strain relief and segregation from feedback cabling.

How does encoder resolution (2048 periods) on MSK100B-0200-NN-M2-AP0-RNNN affect control-loop bandwidth?

The greater fundamental periods combined with drive-side interpolation yields finer quantization for velocity estimation and reduced limit cycles. Its EnDat synchronous serial transmission supports deterministic sampling for high-quality current/velocity loops.

For MSK100B-0200-NN-M2-AP0-RNNN, what acoustic and environmental limits should be considered in machine design?

The MSK series sound pressure levels are ~<75 dB(A) under standard conditions; IP65 construction and Class F insulation are typical across the family. It maintains alignment and shaft-seal lubrication to control wear and heat.

Why specify natural-convection cooling for MSK100B-0200-NN-M2-AP0-RNNN, and what are the thermal implications?

Its natural convection simplifies installation and reduces maintenance but thermal headroom depends on ambient conditions and load profile. Bosch Rexroth characterizes MSK motors at 60 K/100 K models.

MSK 100B-0200-NN-M2-AP0-RNNN

MSK-100B-0200-NN-M2-AP0-RNNN

MSK100B 0200 NN M2 AP0 RNNN

MSK100B-0200-NN-M2-AP0

MSK100B0200NNM2AP0RNNN

MSK1OOB-O2OO-NN-M2-APO-RNNN

MSKI00B-0200-NN-M2-AP0-RNNN

Bosch Rexroth Indramat designs the MSK100B-0200-NN-M2-AP0-RNNN servomotor with a keyway design of shaft. It has an EnDat 2.1 optical encoder of 2048 periods for precise positioning. This unit is designed with natural-convection cooling and it possess no holding brake. It has an A-side power connector for easy and flexible cable routing in applications like metal-forming and handling systems.