The Bosch Rexroth R911318323 (MSK100C-0450-NN-S1-AP0-NNNN) synchronous servomotor sports a 0450 windings code and requires intact electrical and mechanical connections for commissioning. The device, featuring high absolute air humidity of 29g/m3, may have limited availability under unfavorable conditions. Its performance could be negatively impacted by excessive dirt, dust, or chips. Regular inspections for potential damage to motor connection cables are necessary, and replacement is advised if needed. The device may emit a running noise due to bearing damage or trapped foreign bodies. The unit, which should be operated only by authorized personnel, requires a drive controller and a secure connection of its protective conductor for operation. The device also includes a fixed bearing on the B side, a single-turn encoder with 128 signal periods, and an abrasive seal on the shaft resistant to chemicals and oils. To ensure optimal heat emission, regular cooling of the device's fins is required.
Windings Code: 0450 Connection Requirement: Electrical and mechanical connections in place Shutdown Requirement: Main switch of machine switched OFF Absolute Air Humidity: 29g/m3 Fixed Bearing Location: B side Single-Turn Encoder: 128 signal periods Controller Requirement: Cannot be used without a drive controller Protective Conductor Requirement: Secure connection
Surface Temperature: over 60°C during or soon after its operation Shaft Material: Abrasive seal resistant to chemicals and oils Storage and Transportation: Only in horizontal orientation.