R911321738 (MSK100A-0300-NN-S1-BP0-NNNN)
MSK IndraDyn S Synchronous Motors
Technical Specifications
IP Rating
IP65
Insulation Class
155
Maximum Speed
5200 rpm
Maximum Torque Output
54 Nm
Working Temperature Range
0 to +40 degrees Celsius
Shipping Temperature Range
-20 to +80 degrees Celsius
Maximum Installation Height
1,000 meters above mean sea level
Continuous Torque at 100K
17 Nm
Constant Current
11.6 A
Polar Pairs
4
Thermal Time Constant
39 minutes
High Constant Torque
22.5 Nm
Low Constant Current
15.3 A
Encoder Type
Single-Turn Hiperface
Sealing Ring
Yes
Electrical Connection
B side of housing.
Frequently Asked Questions
Why choose the B-side power connector orientation in dense machine frames and how does it affect EMC/EMI compliance?
Its B-side routing can shorten cable runs to drives and separate power from feedback harnesses for reducing loop area and radiated emissions. Its maintained segregation and proper shielding/grounding improves noise immunity of encoder channels and current sensors.
How does the 11,200 mH winding inductivity on MSK100A-0300-NN-S1-BP0-NNNN influence current ripple and achievable servo bandwidth?
The high phase inductance attenuates PWM ripple and smooths torque production at the expense of higher electrical time constants. Its current-loop tuning accounts for L/R limits, inverter switching frequency and desired crossover to avoid phase-lag instability.
What are the mechanical trade-offs of the shaft-with-keyway interface compared to taper or spline couplings on precision axes?
The keyed shafts simplifies hub alignment and transmit torque reliably but can introduce micro-backlash if key fit isn’t controlled. The spline or shrink-fit couplings can raise torsional stiffness, yet require tighter machining and installation tooling.
What mounting and fastening guidance applies to MSK size-100 frames to preserve alignment under dynamic torque?
The Rexroth’s flange assembly is appropriate for grade fasteners, torque values and flatness checks that sustains both static load and operational forces. Its proper mechanical seating and strain-relieved cabling reduces bearing loads and vibration-induced drift.
How does the Hiperface singleturn optical encoder on MSK100A-0300-NN-S1-BP0-NNNN improve commutation alignment and position fidelity during startup and cyclic motion?
The Hiperface scheme provides absolute position over one revolution plus high-resolution sin/cos incremental tracks for simplifying phase initialization and minimizing index searches. Its hybrid analog/digital channeling yields precise interpolation and controller-synchronous updates for smooth servo loops.
Common Misspellings
MSK 100A-0300-NN-S1-BP0-NNNN
MSK-100A-0300-NN-S1-BP0-NNNN
MSK100A 0300 NN S1 BP0 NNNN
MSK100A-0300-NN-S1-BP0
MSK100A0300NNS1BP0NNNN
MSK1OOA-O3OO-NN-S1-BPO-NNNN
MSKI00A-0300-NN-SI-BP0-NNNN
Internal Product Review
The MSK100A-0300-NN-S1-BP0-NNNN servomotor from Indramat is sized 100 and it relies on natural convection cooling. It is equipped with optical feedback encoder of 128 signal periods for motion and speed control. This unit provides 17.0 Nm torque at stationary and up to a peak value of 54.0 Nm by utilizing 45.9 A of current. It has keyway shaft and B-side power connector. It is widely deployed in systems like machine tools, packaging and printing.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK100A-0300-NN-S1-BP0-NNNN.
Want to 
