R911323723 (MSK100C-0200-NN-S2-AG2-RNNN)

Name: R911323723 (MSK100C-0200-NN-S2-AG2-RNNN)
Brand: Indramat Motors
SKU: MSK100C-0200-NN-S2-AG2-RNNN
Price: 583.00 USD
Availability: InStock

MSK IndraDyn S Synchronous Motors

Front Right

In-Stock, Ships 3-5 Days

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
sales@indramat-usa.com

The Bosch Rexroth MPN R911323723 (MSK100C-0200-NN-S2-AG2-RNNN) is an IndraDyn S synchronous servomotor designed for applications requiring precise motion control. It features a single-turn EnDat 2.1 optical encoder with 2048 signal periods and operates optimally between 0 °C and 40 °C. Cooling is achieved via natural convection and the power connector is located on the A-side. The servomotor includes a plain shaft, an electrically-released holding brake with a torque rating of 70 Nm, and a chemically resistant radial sealing ring. Additional characteristics include a continuous current at standstill (100 K) of 20.3 A, continuous torque of 43.5 Nm, maximum current of 79.7 A, maximum torque of 148.0 Nm, and a winding inductivity of 6,700 mH. The unit has a motor size of 100 with length C, and a concentricity-optimized design. IP65 protection is ensured when cap nuts are fully tightened. The servomotor is not suitable for potentially explosive environments; sensors and encoders must be properly connected for accurate temperature measurement and motor control. Gasket integrity should be monitored in environments subject to temperature fluctuations.

Technical Specifications

Temperature Display
Defective/Wrong

Temperature Sensor
Available

Motor Storage
Must be properly disconnected from the machine

Holding Brake
Electrically Releasing

EMC Requirements
Must be followed for installation

Encoders and Sensors
Can malfunction causing faulty control

Handling Equipment
Specific tools and equipments required

Encoder Type
Single-turn EnDat 2.1 optical

Permissible Ambient Operating Temperature
0 to 40°C

Voltage Deviation
Fault detection and elimination necessary

Increased Temperature
Possible in case of a fault

Explosive Atmosphere/Materials Usage
Not approved

Gasket Deterioration
Possible due to temperature fluctuations

Backup Support
Available from Indramat USA for one year

Protection Rating
IP 65 (if cap nuts are fully tightened)

Design Type
Standard

Shaft Description
Plain, very quiet running

Radial Sealing Ring
Chemical and Oil Resistant

Shaft Sealing Point
Should not be soiled or run in dry state

Global Dispatch
Available

Frequently Asked Questions

Why integrate a brake on the MSK100C-0200-NN-S2-AG2-RNNN?

During stops, the electrically released unit holds 70 Nm, preventing drift and safeguarding vertical or offset loads when drives disable torque.

What peak envelope supports dynamics on the MSK100C-0200-NN-S2-AG2-RNNN?

Short-term demands allow 148.0 Nm torque with current to 79.7 A, overcoming inertia and shortening ramp intervals in positioning sequences.

How does the cooling approach benefit the MSK100C-0200-NN-S2-AG2-RNNN?

With natural convection, the motor dissipates heat continuously while meeting rated availability for 20.3 A and 43.5 Nm without auxiliary fan hardware.

What resolution figure supports control accuracy on the MSK100C-0200-NN-S2-AG2-RNNN?

Per revolution, 2048 signal periods feed the controller, reducing quantization effects and enhancing very slow motion smoothness.

How does inductivity assist current control in the MSK100C-0200-NN-S2-AG2-RNNN?

A 6,700 mH winding moderates current slew rates, limiting ripple and stabilizing torque under aggressive servo tuning.

Common Misspellings

MSK100C0200NNS2AG2RNNN

MSK100C 0200 NN S2 AG2 RNNN

MSK-100C-0200-NN-S2-AG2-RNNN

Internal Product Review

The MSK100C-0200-NN-S2-AG2-RNNN applies increased concentricity to minimize runout in precision couplings. A plain-shaft interface and singleturn EnDat2.1 feedback support tight alignment and clean phase control during repeated index moves, making it a very in demand model.