R911323730 (MSK101C-0300-NN-S1-AG2-NNNN)

How does the singleturn Hiperface encoder (S1) in MSK101C-0300-NN-S1-AG2-NNNN influence positioning accuracy and drive commissioning?

The ‘S1’ denotes a singleturn Hiperface encoder with 128 signal periods for providing absolute position within one revolution and commutation. Its compatibility simplifies cabling and parameters, speeds commissioning and stabilizes low-speed tracking.

What is the functional value of the 6,000 mH stator inductance on the MSK101C-0300-NN-S1-AG2-NNNN in servo loops?

Its high phase inductance filters current ripple for reducing torque ripple and aiding stable low-speed control. Its tradeoff is a longer electrical time constant, which slows current rise during abrupt load changes.

Why is a 70 Nm electrically released holding brake used on this motor, and how does it protect vertical or Z-axes?

Its electrically released brake holds the axis when power is removed and engages during e-stops for preventing back-driving. On vertical axes, MSK101C-0300-NN-S1-AG2-NNNN’s 70 Nm capacity supports gravity loads during controlled deceleration.

What advantages does the A-side power connector offer when integrating this Bosch Rexroth Indramat motor in multi-axis machines?

Its consistent A-side orientation enables tidy power routing and separation from encoder leads for reducing EMI and easing service. Its standardized routing supports panel layouts across gantry, spindle and transfer axes with MSK101C-0300-NN-S1-AG2-NNNN.

How do the 36.5 Nm continuous torque at 100 K and 21.3 A continuous current characterize sizing of MSK101C-0300-NN-S1-AG2-NNNN?

The 36.5 Nm at 21.3 A sets thermal sizing, while intermittent duty may push averages if off-time cools adequately. Its 110 Nm at 84.2 A covers accelerations within drive current and temperature limits.

MSK101C0300NNS1AG2NNNN

MSK101C 0300 NN S1 AG2 NNNN

MSK-101C-0300-NN-S1-AG2-NNNN

The MSK101C-0300-NN-S1-AG2-NNNN servomotor from Bosch comes with a plain shaft design and A-side power connector. It relies on natural convection for maintaing ambient thermal range. This motor is accompanied by a singleturn Hiperface encoder of 128 periods and in includes 70 Nm brake. It possesses 6 H of inductance and delivers 36.5 Nm continuous torque to suit opertaions in CNC machining, packaging and printing lines.