R911325569 (MSK071C-0450-NN-M1-AG2-NNAN)

The continuous torque defines steady thermal capability with natural-convection cooling, while the peak rating supports short acceleration bursts. Its proper thermal modeling and cycle-time averaging ensure overload segments stay within time/temperature limits for reliability.

It provides 128 signal periods with absolute multi-turn data retention. It removes homing after power cycles, accelerates commissioning and supports tighter position control with finer interpolation in closed-loop motion.

The plain shaft enables backlash-controlled, force-fit clamp hubs or precision bellows couplings for direct drives. Its radial/axial load limits and bearing-life assumptions are important to consider when selecting hub lengths and overhung loads.

The IP65 indicates dust-tightness and resistance to low-pressure water jets when connectors are fully tightened for including the 240° rotatable sockets. It is important to avoid fluid pooling at the shaft seal, particularly in vertical, shaft-up orientations.

The 24 VDC release brake secures loads during standstill, its size mechanisms for static torque exceeds worst-case gravity and disturbance torques. It is for holding device, while dynamic stopping belongs to drive/PLC safety functions.