R911326758 (MSK101E-0200-NN-M2-BP2-RNNN)

MSK IndraDyn S Synchronous Motors

MSK101E-0200-NN-M2-BP2-RNNN Series Image

In Stock, Ships 2-3 Days

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The Bosch Rexroth MPN R911326758 (MSK101E-0200-NN-M2-BP2-RNNN) is an IndraDyn S synchronous servomotor featuring a fixed encoder connector with pin-type contacts, compatible with Rexroth-specific cables and accessories. It utilizes an EnDat2.1 optical multiturn absolute encoder with a resolution of 2048 signal periods and supports a shaft with a keyway and a DS M12 centering hole. The motor is designed for both vertical and horizontal installation, with housing to remain unvarnished. The shaft sealing ring resists chemicals and oils and acts as an abrasive seal. Protection rating is IP67 for connectors when properly installed. Operating within DIN EN 60721-3-3 standards, it tolerates absolute air humidity from 1g/m³ to 29g/m³, an axial shock load of 100 m/s², and a radial shock load of 200 m/s² for 11 ms. It supports a continuous current at standstill of 39.0 A and continuous torque at standstill of 80.5 Nm (at 100K), with a maximum current of 144.5 A and maximum torque of 231.0 Nm. The holding brake provides 70 Nm torque and is electrically released. The motor measures 511 mm in length, employs natural convection for cooling, requires cooling class FN, and adheres to vibration severity grade Level A per EN 60034-14. Operational altitude should not exceed 3000 m, with a temperature change rate no greater than 0.5°C/min.