R911329218 (MSK101C-0300-NN-S3-FG0-NPNN)
MSK IndraDyn S Synchronous Motors
Technical Specifications
Use Environment
Industrial
Product Group
MSK
Water Resistance
None
Operation
Qualified personnel
Temperature During Operation
High
Holding Brake
Not present
Cool Down Period
Required after shutdown
Mounting Equipment
Must be suitable
Frame Size
B5 according to EN 60034-7
Shaft
Smooth with sealing ring
Encoder System
Inbuilt
Pole Pairs
Four
Phases
Three
Disassembly
Dismount from machine first
Combustion
Occurs at temperatures over 60°C
Materials
Brass, aluminum, copper, steel
Electrical Connections
Via circular connectors
Torque Reduction
20% to 30% when fitted with transmissions
Coating
No additional varnish on housing
Interface
Hiperface
Maximum Ambient Temperature
40°C for operation with rated data
Shipping
Global
Frequently Asked Questions
How does passive natural-convection cooling on the MSK101C-0300-NN-S3-FG0-NPNN affect usable continuous torque and installation constraints?
Its natural convection relies on unobstructed airflow and clean surfaces, while contamination or enclosure crowding reduces heat dissipation and continuous rating. It is important to observe 0–40 °C ambient, IP65 conditions and provide thermal margins when sizing the axis.
What does a capacitive singleturn Hiperface encoder (16 signal periods) imply for control precision and tuning?
The S3 capacitive Hiperface system provides deterministic phase information and fine interpolated position for stable low-speed control and smooth commutation. It interprets 16 electrical periods per revolution for enabling accurate velocity loops and crisp contouring.
Why choose the plain keyed shaft and B5 flange on the MSK101C-0300-NN-S3-FG0-NPNN for gearbox coupling?
Its keyed plain shafts simplify torque transmission and service while the B5 flange centers the motor precisely on reducers or frames for minimizing misalignment. Its shaft/bearing force limits when selecting couplings and overhung loads.
How do 6,000 mH winding inductivity and 84.2 A maximum current influence drive selection and current ripple?
The higher inductivity damps di/dt and torque ripple, aiding low-speed smoothness but requiring adequate bus voltage and current-loop bandwidth for dynamics. It is important to ensure the selected IndraDrive current rating accommodates 84.2 A peaks during acceleration profiles.
What environmental ratings and basic limits apply, and how do they guide cabling via the terminal box?
The MSK101C tables indicate IP65 and 0–40 °C ambient; plan gland sizes, shielding and strain relief consistent with EMC practices in industrial environments. It is important to maintain clear airflow paths to preserve natural-convection performance.
Common Misspellings
MSK101C0300NNS3FG0NPNN
MSK101C 0300 NN S3 FG0 NPNN
MSK-101C-0300-NN-S3-FG0-NPNN
Internal Product Review
The Bosch Rexroth’s MSK101C-0300-NN-S3-FG0-NPNN servomotor uses natural convection heat dissipation through it surface and it supports B5 flange mounting. It comes with a keyed plain shaft design and possess a terminal-box connector for safety. This motor relies on a singleturn capacitive feedback system that complements IndraDrive control. At 300 rpm it delivers 36.5 Nm continuous and 110 Nm peak to suits CNC, packaging and robotic assemblies.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK101C-0300-NN-S3-FG0-NPNN.
Want to 
