Shaft Type: Without Keyway
Brake: Yes
Encoder System: Optical
Destined Use: For operation in potentially explosive areas
Installation Condition: Non-defective
Operating Condition: No explosive atmosphere during fault
Ambient Operating Conditions: Should be observed
Holding Brake Use: Only at standstill in normal operation
Relative Air Humidity: 5%
Acceptance Test: Every time it is changed
Type Plate Marking: Must be done before installation
Certification: UL Listed, CSA Certified
Operating Mode: S3
Encoder Interface: EnDat 2.1
Directives Adherence: ATEX 2014/34/EU
Hazardous Substance: None
Operation Procedure: According to documentation
Combustion Temperature: More than 60°C
Maintenance Precaution: Allow to cool down before maintenance
Temperature Display State: Defective or wrong if sensor not connected
Holding Brake Rated Current: 1.9A
Moment of Inertia: 0.003kgm2
Delivery: Trusted logistics agents