R911332077 (MSK100A-0300-NN-S1-AG1-NNNN)
MSK IndraDyn S Synchronous Motors
Technical Specifications
Product Type
Synchronous Motor
Output Shaft Type
Torque-Transferring, Plain Output Shaft
Noise Level
Less than 75 Decibels
Number of Polar Pairs
4
Weight
23 Kilograms
Continuous Torque at 100K
17 Nm
Continuous Torque at 60K
15 Nm
Maximum Rotational Speed
5200 Revolutions Per Minute
Power Connection Position
A-side of the Housing
Moment of Inertia
0.01100 kgm2
Motor's Windings Inductance
11.20 mH
Motor's Windings Resistance
1.10 Ohms
Thermal Time Constant
39 Minutes
Insulation Class
155
Protection Grade
IP65
Holding Brake's Holding Torque
32 Newton Meters
Holding Brake's Mass
1.1 Kilos
Maximum Torque
54 Nm
Continuous Torque
22.5 Nm
Operating Temperature Range
0 to +40 Degrees Celsius
Frequently Asked Questions
How does the Hiperface single-turn encoder in MSK100A-0300-NN-S1-AG1-NNNN support precise positioning?
The sin/cos Hiperface interface provides absolute position for one revolution and fine incremental feedback from 128 periods for improving low-speed smoothness and commutation. It reduces startup homing time and simplifies long-cable transmission.
Why is the A-side power connector orientation relevant in MSK100A-0300-NN-S1-AG1-NNNN?
The A-side exit eases cable routing in tight machine bays for improving bend-radius compliance and separation from feedback lines. It helps EMC practices and reduces connector strain during axis service.
What benefits does natural-convection cooling offer for this IndraDyn S motor?
Its thermal management minimizes airborne contamination and lowers maintenance points while preserving continuous torque at standstill. It’s well-suited to clean packaging, printing and electronics environments where forced-air flow is undesirable.
How do 17.0 Nm continuous and 54.0 Nm peak torque values affect axis sizing?
The ratio between continuous and peak torque accommodates intermittent load spikes during indexing, with thermal headroom for duty cycles. Its integrators can downsize gear ratios while meeting acceleration targets within temperature limits.
What is the role of the electrically-released 32 Nm holding brake in this model?
The brake holds position when power is removed for preventing vertical-axis drift and safeguarding tooling. Its electrically-released design integrates with drive safety states for controlled stops and maintenance latching.
Common Misspellings
MSK100A0300NNS1AG1NNNN
MSK100A 0300 NN S1 AG1 NNNN
MSK-100A-0300-NN-S1-AG1-NNNN
Internal Product Review
The MSK100A-0300-NN-S1-AG1-NNNN servomotor from Bosch Rexroth uses a singleturn optical encoder with a Hiperface interface. It is used in robotics, printing, packaging, and semiconductor industries. The motor provides 17.0 Nm continuous torque and 54.0 Nm peak torque with natural convection cooling.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK100A-0300-NN-S1-AG1-NNNN.
Want to 
