R911332676 (MSK101C-0300-NN-S3-AG0-NNNN)

How do the continuous and maximum current/torque ratings of MSK101C-0300-NN-S3-AG0-NNNN influence axis sizing?

Its continuous torque is 36.5 Nm with 21.3 A, while maximum torque reaches 110 Nm at 84.2 A. Its headroom margins enable selection for acceleration-intensive move profiles while keeping thermal load inside natural-convection limits.

What encoder system is integrated in MSK101C-0300-NN-S3-AG0-NNNN and how does it aid servo control?

It uses a singleturn capacitive encoder with a Hiperface interface. It provides deterministic phase initialization and commutation feedback for improving low-speed smoothness and drive tuning with Rexroth IndraDrive controllers.

How does the 6,000 mH winding inductivity on MSK101C-0300-NN-S3-AG0-NNNN affect control bandwidth and current ripple?

The higher inductivity attenuates current ripple and eases current-loop tuning at the drive. Its trade-off is slightly reduced electrical bandwidth, which the IndraDrive compensates through optimized current controllers.

What are the implications of the singleturn (vs. multiturn) encoder on MSK101C-0300-NN-S3-AG0-NNNN for homing strategy?

The singleturn tracking resets absolute position after multi-revolution loss of power, so systems should include a reference marker or absolute scale. Its Hiperface initialization ensures prompt commutation alignment at startup.

What shaft and mechanical interface considerations apply to MSK101C-0300-NN-S3-AG0-NNNN in high-precision couplings?

The MSK family supports plain or keyed shafts with DIN-compliant fits and balancing guidance for coupling to low-backlash gearheads. It is important to observe Rexroth mounting tolerances to minimize runout and transmitted vibration.

MSK101C0300NNS3AG0NNNN

MSK101C 0300 NN S3 AG0 NNNN

MSK-101C-0300-NN-S3-AG0-NNNN

Bosch Rexroth produces the servo motor MSK101C-0300-NN-S3-AG0-NNNN as part of the IndraDyn S series with a peak current rating of 84.2 A. It is passive heat dissipation method for maintaining operatable thermal range. This unit relies on a singleturn Hiperface capacitive encoder for feedback. It is designed to delivers 36.5 Nm of torque at standstill with 21.3 A current usage and its inductive value is specified as 6000 mH that is suitable for machine tools, packaging and handling automation.