R911335542 (MSK101C-0300-NN-M2-BG0-RNNN)
MSK IndraDyn S Synchronous Motors
Technical Specifications
Output Shaft
Plain
Encoder System
Optical
Holding Brake
None
Drive Controller
Functions as converter
Waterproof
No
Operating Temperature
0°C to 40°C
Usage
Industrial applications only
Grounding Connection
Mandatory
Operating Surface Temperature
Over 60°C
Cooling Mechanism
Self-cooling
Approved for Explosion-prone Area
No
Motor Housing
Not leakproof
Protection Rating
IP 67 for connectors
Approval Needed for Attached Components
Yes
Fan Operation
Not permitted without a fan
Encoder Type
Multiturn absolute
Global Delivery
Yes
Ice/Salt Formation
None allowed on device housing
Frequently Asked Questions
How does natural-convection cooling in the MSK101C-0300-NN-M2-BG0-RNNN influence continuous torque capability inside control cabinets?
The natural convection depends on motor surface area and thermal path rather than forced airflow. It sustains 36.5 Nm at 100 K standstill when clearances and ambient conditions meet the datasheet assumptions.
What advantages does the MSK101C-0300-NN-M2-BG0-RNNN’s increased concentricity design provide for precision indexing or contouring?
Its improved concentricity reduces mechanical runout and eccentricity-induced torque ripple for easing servo tuning and improving path accuracy. Its lower radial error motion also mitigates vibration peaks, benefiting bearings, couplings and frequency-domain stability margins.
Why choose the plain-shaft MSK101C-0300-NN-M2-BG0-RNNN, and which couplings are appropriate?
Its plain shaft allows selection of zero-backlash bellows, elastomer jaw or shrink-disc couplings to match stiffness and misalignment needs. Its permissible radial/axial loads and fit tolerances needs to be observed to maintain concentricity and torsional compliance targets.
How does the optical multiturn EnDat 2.1 encoder (2048 signal periods) enhance recovery after power loss?
The multiturn absolute system preserves turn count, so axes power up with known position and no homing cycle or external reference switch required. Its EnDat’s digital, bidirectional serial link simplifies wiring and supports high-resolution interpolation with strong timing integrity.
What are the cabling and maintenance implications of the B-side power connector on MSK101C-0300-NN-M2-BG0-RNNN?
The B-side orientation can parallel common routing planes on gantries for improving service loops and separation from feedback cabling. It can reduce induced noise, ease strain-relief design and simplify tool-side cable trays during maintenance.
Common Misspellings
MSK101C0300NNM2BG0RNNN
MSK101C 0300 NN M2 BG0 RNNN
MSK-101C-0300-NN-M2-BG0-RNNN
Internal Product Review
The MSK101C-0300-NN-M2-BG0-RNNN motor from Bosch Rexroth Indramat offers feedback through its provoded optical multiturn EnDat 2.1 encoder of 2048 periods. It possesses increased concentricity and a plain shaft, without a brake. It relies on natural-convection cooling and connects through its B-sided connector. This motor support 36.5 Nm/21.3 A and 110 Nm peak. It is applicable in packaging, machine tools, printing, robotics, food-processing lines and metal forming systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK101C-0300-NN-M2-BG0-RNNN.
Want to 
