R911335606 (MSK071C-0300-NN-S3-UP0-NNNN)

The Hiperface carries absolute position over RS-485 while simultaneously providing analog sin/cos for high-resolution interpolation, so commissioning and homing cycles are faster. Its drive diagnostics and parameter storage in the encoder memory simplifies replacement and maintain traceability.

The motor can continuously produce 14.0 Nm at standstill with 8.5 A for assuming adequate ambient conditions and convection. It defines the thermal envelope for sizing holding loads, low-speed machining or indexing duty on this code.

The swivel range lets installers orient the back shell to relieve bend-radius limits and avoid cable trays for improving EMC and serviceability in crowded cabinets. It also eases right-angle exits on vertical axes with drag chains.

The high inductance filters PWM ripple, reducing current ripple and acoustic noise at mid-frequencies but slows di/dt during sharp transients. Its controller current-loop bandwidth and switching frequency should be tuned accordingly to achieve desired acceleration without overvoltage events.

The keyway provides positive torque transmission with standard hubs for simplifying repeatable assembly and emergency-stop torque spikes. For low runout applications, specify balanced, interference-fit couplings and verify key-fit tolerances to limit eccentricity and torsional backlash.