R911335781 (MSK101C-0300-NN-M3-AG0-NNNN)

What does the “M3” in MSK101C-0300-NN-M3-AG0-NNNN specify, and why does it matter for commissioning?

It denotes a capacitive multiturn absolute encoder with a Hiperface interface and 16 signal periods for enabling absolute position on power-up. It simplifies homing strategies and reduces commissioning time in multi-axis cells.

How do the 36.5 Nm continuous and 110 Nm maximum torque ratings of MSK101C-0300-NN-M3-AG0-NNNN translate to axis sizing?

The continuous torque covers thermal steady-state load, while the 110 Nm ceiling supports transient acceleration or disturbance rejection. Its inertia and duty-cycle data yields reliable servo sizing margins.

Why is natural-convection cooling on the MSK101C-0300 advantageous in certain machine layouts?

The fanless convection reduces maintenance points, airborne contamination and wiring. It’s useful in hygienic packaging lines or quiet lab equipment where airflow devices are undesirable.

What does the “A-side power connector” in MSK101C-0300-NN-M3-AG0-NNNN imply for cabinet and cable routing?

The “A” indicates a flange socket on the A-side for aiding cable exit planning along the machine’s service corridor. It uses this letter to define connector orientation explicitly.

he product lists ~6,000 mH winding inductivity—how does that affect drive tuning for MSK101C-0300-NN-M3-AG0-NNNN?

The higher phase inductivity filters current ripple for easing compliance with PWM drives, while it may slightly limit electrical bandwidth. Its drive current loop gains are set accordingly to maintain tracking stability.

MSK101C0300NNM3AG0NNNN

MSK101C 0300 NN M3 AG0 NNNN

MSK-101C-0300-NN-M3-AG0-NNNN

Bosch Rexroth designs the IndraDyn series servo motor MSK101C-0300-NN-M3-AG0-NNNN that delivers 36.5 Nm continuous torque and 110 Nm peak torque. It utilizes natural-convection cooling and a plain shaft design. This motor has an integrated multiturn capacitive encoder of 16 signal periods for streamlining absolute positioning. It is suitable for packaging, processing and machine-tool axes where precise torque density is required.