R911336249 (MSK101C-0300-FN-S1-AP0-NNNN)
MSK IndraDyn S Synchronous Motors
Technical Specifications
Product Line
MSK Synchronous Servo Motors
Encoder Type
Single-turn Encoder
Encoder Interface
Hiperface
Encoder Accuracy
±80 Angular Seconds
Encoder Measuring Principle
Optical
Protection Against Thermal Overload
KTY84 Thermal Sensor
Cooling Method
Liquid Cooling
Max Speed
4500 RPM
Pole Pairs
4
Max Current
84.2A
Ingress Protection Rating
IP 65
Useable in Harsh Conditions
Yes
Frequently Asked Questions
Why use an optical singleturn Hiperface encoder (128 signal periods) on MSK101C-0300-FN-S1-AP0-NNNN?
The Hiperface singleturn feedback supplies precise commutation and position with low inertia and simple cabling. Its drive interpolates 128 periods to yield fine angular resolution for synchronized axes and contour accuracy.
How does 6,000 mH winding inductivity affect current ripple and control-loop bandwidth in MSK101C-0300-FN-S1-AP0-NNNN?
The higher inductivity moderates di/dt for reducing current ripple for a given PWM frequency and bus. Its tradeoff is a slower electrical time constant that mitigated by current-loop tuning and feed-forward.
How does the keyed shaft with keyway on MSK101C-0300-FN-S1-AP0-NNNN simplify mechanical integration and torque transfer?
Its keyed interface provides positive drive for reducing reliance on frictional clamping. It eases alignment with legacy hubs or gearheads to minimize slip risk under transients and simplifies maintenance swaps.
For synchronized packaging or robotics cells, how do encoder resolution and torque of MSK101C-0300-FN-S1-AP0-NNNN support repeatability?
The interpolated 128-period feedback yields fine angular quantization for registration, camming and phase alignment. Its 36.5 Nm continuous and 110 Nm peak mantains velocity uniformity through load transients.
How does the liquid cooling on MSK101C-0300-FN-S1-AP0-NNNN influence usable continuous torque and duty cycles?
The liquid circulation extracts winding heat efficiently for keeping the thermal model near its 100 K assumption and limiting derating. It consequently sustains higher continuous torque during long production duty.
Common Misspellings
MSK101C0300FNS1AP0NNNN
MSK101C 0300 FN S1 AP0 NNNN
MSK-101C-0300-FN-S1-AP0-NNNN
Internal Product Review
Bosch Rexroth designs the servo motor MSK101C-0300-FN-S1-AP0-NNNN with A-sided power connector for flexible wiring. It comes with a balanced keyed design of shaft that is controlled through its attached optical singleturn feedback system of 128 periods to support accurate positioning. This unit provides a rated 36.5 Nm of continuous torque and 110 Nm peak that is ideal for CNC machining, packaging and robotic systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK101C-0300-FN-S1-AP0-NNNN.
Want to 
